***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Full size spare

Lancer Interior Modifications.

Moderators: Moderators, Senior Moderators

User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Wed May 27, 2009 2:46 pm

Did the nail have half its flat head missing - if not it wasn't from a nail gun.

The other cause could be just plain old bad luck - but a nail would be hard pressed to go too far into a sidewall without some assistance.
ClubCJ's first Sportback

User avatar
slickthug
Lancer VR/GT
Lancer VR/GT
Posts: 217
Joined: Tue Jan 13, 2009 1:12 pm
Location: Sydney, NSW, Australia

Postby slickthug » Thu Jul 23, 2009 3:13 am

theres that thing where you can put some slime (i think its called) in your tyre. when it gets punctured the slime quickly oozes out and repairs the puncture.

http://www.youtube.com/watch?v=khUHlSZaH-8

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Thu Jul 23, 2009 3:19 am

Slim is carbon based and will wash out in water. The Pump is good for flat tyres but once you use it you can't repair the tyre and the gas eats at the alloy mag. The best on the market is tyresheild which is laytex. But just like slim it needs to be in the tyre before it gets punctured
Image

[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Thu Jul 23, 2009 4:53 am

Back when I had my Mirage I had just got some new tyres, and within 2 weeks, I came into contact with an Echidna thus puncturing my tyre with A LOT of spikes. If I had put a tube in the tyre, it would've kept popping as they tyre wore down, as the spikes would get pushed further in.

So my old man and I came up with an idea. If it worked, it worked, if not then a new tyre it was...

We first bought a can of Holts brand puncture sealant, then as per the instructions, repaired the tyre with it. (I put the repaired tyre on the rear, for safety reasons in case it did go flat again)

After a day or so (to let the sealant harden) I went down to the local servo and removed the valve completely, thus releasing all the gas from the puncture repair process, and replaced the valve with a new one and then filled the tyre up with compressed air to the normal pressure, and off I went.

I thought "oh yeah I'd get a week out of this..." I got 6 months and 25,000kms out of it!!! Unbelievable! When it did finally go flat on me, it was on a pitch black Saturday night at 8pm (and not far from where I live now actually lol)

By that stage, the tyres were pretty much all getting worn anyway, so I replaced them all.

EDIT: Brand was Holts and it looked like this:
Image

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Thu Jul 23, 2009 8:03 am

Nice work there :)

The last puncture was on the original tyres in the ES. The sidewall gave way. I had to drive the rest of the way to work and home up the freeway on my space saver.

I ordered the full size spare kit and yes it takes a lot of space away. But gives you little compartments too. I will take some pics when I get a chance.

User avatar
Josh_Emerton
Lancer MASTER
Lancer MASTER
Posts: 1920
Joined: Fri Oct 17, 2008 10:49 pm
Location: Cairns, QLD, Australia

Postby Josh_Emerton » Thu Jul 23, 2009 9:55 am

I bought a full size spare last week actually. Anyone got any ideas on how to put up my boot floor without buying the dealer-mod? its expensive when imo a rolled up carpet would do it for example.
Image

User avatar
Mizta B
Alumni
Alumni
Posts: 5867
Joined: Sun Dec 21, 2008 8:29 am
Location: Mortdale, NSW, Australia

Postby Mizta B » Thu Jul 23, 2009 10:19 am

How about some Customwood I think it's called or MDF and a fabric cover to make a false floor of sorts?
That timber they use on Stereo installs.
Australasian Gerbil Rearers Organisation, Official Re-Seller.
Image
MY09 Rally Red VRX ClubCJ's 1st 4B12 2.4L - CCJ Lifetime Member #0004.
Merlinised....

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Thu Jul 23, 2009 10:29 am

To tell you the truth, I think going to clark rubber and getting some foam cut to size would be good... and lighter than MDF.

Then get some small masonite panels cut to size.

I got the kit because I am lazy, but I do like the little compartments. I store my cleaning stuff a few tools and my inverter etc.

User avatar
slickthug
Lancer VR/GT
Lancer VR/GT
Posts: 217
Joined: Tue Jan 13, 2009 1:12 pm
Location: Sydney, NSW, Australia

Postby slickthug » Thu Jul 23, 2009 10:55 am

lol i like the echidna story. i guess echidnas go down swinging.

i would also like to think of a boot alternative. maybe remove the whole top cardboard bit and carpet up the bottom? then a spare tyre could just be secured to the side somehow?

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Thu Jul 23, 2009 12:16 pm

Got my full size spare today.

And it actually a really full size. EXACTLY the same as my VRX wheels hahaha

Also have the genuine fitment kit. But I will have to modify it to fit around my custom sub box...

I bought the rim and fitment kit off Brisbane member who bought it but can't use it! (Thanks Chris!) Getting a tyre on it a 3pm, then I'm all set.

I may even end up doing a custom boot raise, then I could sell the foam to somebody if they're interested...

Also random fact for the day... The Ralliart already has foam in the boot (even to accomodate the spacesaver), and the fitment kit adds to it :wink: The RA's boot recess is shallower than the standard Lancer!!


Return to “Interior”

Who is online

Users browsing this forum: No registered users and 8 guests