***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

MY11 Dash cluster conversion

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
TYR
INACTIVE Member Account
Posts: 13
Joined: Sat Nov 05, 2011 3:33 pm
Location: NT AUS

MY11 Dash cluster conversion

Postby TYR » Thu Nov 10, 2011 5:20 pm

Will the MY11 dash cluster with the multi color dash display work on a MY08 to MY10?
and specialy will this work on an MY09 Evo X?
Hail to the Hammer

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Mon Jan 16, 2012 4:33 pm

yes it will

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Mon Jan 16, 2012 4:35 pm

megatron wrote:yes it will


Are you sure?

Is it just plug and play?

I was under the impression it was completely different.

Have you tried it?

User avatar
MrMuppet
Lancer VR/GT
Lancer VR/GT
Posts: 281
Joined: Sat Dec 12, 2009 8:37 pm
Location: Bellbird Park

Postby MrMuppet » Mon Jan 16, 2012 4:44 pm

And if it is plug n play, what will the cost be??
My CJ is the best. "Why??" It has 3 DVD Players :)
Image

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Mon Jan 16, 2012 4:52 pm

aspir3 wrote:[quote:bce8e7bd95=megatron]yes it will[/quote:bce8e7bd95] Are you sure? Is it just plug and play? I was under the impression it was completely different. Have you tried it?


seen before and after pic from a member on evo oz, but no idea how it was done. im trying to find a DIY on evom now

but from what i can understand is you just replace the screen

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Mon Jan 16, 2012 5:13 pm

@ Alan.

So according to what you have Seen, Read etc ..... the Red Screen we have currently can be Substituted with the Blue/White Color Screen.

This being Correct means the Speedometer & Tachometer Dials remain the same.

Is this what your saying .... ?

If so ... then it doesn't make Sense because I don't think you would be able to purchase a Color Screen alone from Mitsu Spares.
I assume the Color Screen would come included in the Instrument Cluster Unit as one Complete Part.


Sam.
I wish you were correct .... I'd buy the Color Screen alone.
Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Mon Jan 16, 2012 5:20 pm

SAM-24A wrote:@ Alan. So according to what you have Seen, Read etc ..... the Red Screen we have currently can be Substituted with the Blue/White Color Screen. This being Correct means the Speedometer & Tachometer Dials remain the same. Is this what your saying .... ? If so ... then it doesnt make Sense because I dont think you would be able to purchase a Color Screen alone from Mitsu Spares. I assume the Color Screen would come included in the Instrument Cluster Unit as one Complete Part. Sam. I wish you were correct .... Id buy the Color Screen alone.


yes thats how i understand it, as full instrument cluster it fits and is plug and play, but im trying to soruce just the screen on its own

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Mon Jan 16, 2012 5:53 pm

OK Alan .... would be Great if it can be done without too much Fuss or Expense.
Please keep us advised of any further updates or info you come across.


Sam.
Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Mon Jan 16, 2012 6:05 pm

I am fairly sure the one you are thinking of is the member who replaced all his red led's with blue ones and not the new instrument cluster.

There is a "How to" on it some where here with links to EvoOz.

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Tue Jan 17, 2012 9:17 am

aspir3 wrote:I am fairly sure the one you are thinking of is the member who replaced all his red leds with blue ones and not the new instrument cluster. There is a How to on it some where here with links to EvoOz.


NO read all that too, much hard work swaping leds.

the problem is sourceing the screen on its own

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Tue Jan 17, 2012 3:59 pm

finally heard from the horse's mouth and it is FULL plug and play but its the WHOLE instrument cluster. which we can buy from ofey approx $1000.00

sorry but at least we all know now lol

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Tue Jan 17, 2012 4:12 pm

Told Ya So ...... :P

$1000 for a Complete Instrument Cluster ..... Hmmm ..... Na .... I'll stick with the Red ..... :)

But Yeh .... As you Say .... At Least We All Know it Now.


Sam .... :wink:
Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Tue Jan 17, 2012 4:44 pm

Doesn't the new blue cluster have different function?

Things like adjustable indicator sound etc. I dont think those things would work.

I would love to get a second hand one and try it.

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Tue Jan 17, 2012 4:48 pm

aspir3 wrote:Doesnt the new blue cluster have different function? Things like adjustable indicator sound etc. I dont think those things would work. I would love to get a second hand one and try it.


everything will work as normal

User avatar
juan_magick
Lancer Learner
Lancer Learner
Posts: 14
Joined: Tue Oct 27, 2009 9:06 pm
Location: Melbourne

Postby juan_magick » Thu Jul 12, 2012 7:01 pm

Hello, just to confirm, you can get the new colour cluster and it will work. I did it, all I needed to do was get the ODO changed to my current km so I could keep track of my service etc. But just plug and play.

So It works, so does fitting OEM HID lights I did that also. Picked up a cheap pair in the US all plug and play.

So awesome! :lol:

Good luck to anyone who tries,

I have had far more trouble fitting the damn X Factor mirrors to my car. So much work, so Little gain. :x well it seems with all the work involved.


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 11 guests