***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

* Mitsubishi OEM Parts for ClubCJ Members *

For all ClubCJ Members.

Moderator: Senior Moderators

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Tue Jul 21, 2009 8:54 pm

Thanks for that ofey, but maybe I confused you or your contact...

The part I am after more than anything is this: (I finally managed to track a picture down, and I found the part No too)

Part #: 8011A267

Image

I was also after the switches, but I have since found them elsewhere albeit from a wrecked Evo 8 FQ330 :D

Sorry to be a pain mate! You might as well go ahead and order that 8011A267 part, as I know that is exactly the part I require. Let me know how much and I'll forward you the money.

Thanks again, and sorry for being a pain!

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Jul 22, 2009 12:18 am

Make that 2 X RA badges left. Just passed one to JMI.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Deano1964
Lancer Evolution
Lancer Evolution
Posts: 773
Joined: Tue Mar 17, 2009 12:22 am
Location: Melbourne, VIC, Australia

Postby Deano1964 » Sat Jul 25, 2009 3:49 pm

v) Olympic Ed./Aspire Front Grill Set
i)7450A462 GRILLE-RADIATOR (MAIN GRILLE) = (A$246.00)
ii) 6400C109 GRILLE-FR BUMPER-M-SILVER(M LOWER GRILLE) = (A$88.00)
iii) 6400C043 GARNISH-FR BUMPER-CTR-CHROME (LOWER GRILLE SURROUND) = (A$182.00)
Total = A$516.00




Would you be able to get me a price for the platinum top grill? Is it the same price as 7450A462 GRILLE-RADIATOR (MAIN GRILLE) = (A$246.00)

Image

Thanks for all ur effort with this thread!! :)
Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sat Jul 25, 2009 4:53 pm

deano1964 wrote:
Would you be able to get me a price for the platinum top grill? Is it the same price as 7450A462 GRILLE-RADIATOR (MAIN GRILLE) = (A$246.00)

Thanks for all ur effort with this thread!! :)


Yeap, that's the one.
Cheers... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Scott_VRX_Fan
Lancer VR/GT
Lancer VR/GT
Posts: 212
Joined: Sat Apr 18, 2009 5:35 pm
Location: Cranbourne, VIC, Australia

Postby Scott_VRX_Fan » Mon Jul 27, 2009 1:01 pm

just out of interest ofey.

im finally getting my boot and front bumber repaired.

but my question, if you can source it, is whats the difference between a vrx front bumber/grilles etc.. and a ralliart front bumber/grilles?

looks like i will have to replace the front bumper of my vrx, and if they insurance is happy to do it, and it isnt too much, i may get the ralliart front instead and pay the difference.

just a general idea, if you have that infomation handy.
Mods Completed
ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear

Mods To Be Completed
Front Bumper Upgrade

Mods in Development
Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Mon Jul 27, 2009 1:07 pm

Scott, the difference is the bumper, grilles, fog lights and fog light grilles, chrome strip and badges.

It does bolt up, but you might be out of pocket a fair bit as if you only need to replace your bumper then the panel beater would reuse all of your other bits on your new bumper.

Hope that helps mate.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Jul 27, 2009 1:38 pm

I will be getting that info soon. As you can appreciate there are quite a number of parts involved. Will take some time for him to collate.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Jul 27, 2009 1:40 pm

All RA badges have been accounted for:

1. The_Bandit
2. SIR-VRX
3. Stalker
4. Marsh
5. tyrg
6. JMI
7. Ash06
8. lzy_eye

sorry. Now we wait for December.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Scott_VRX_Fan
Lancer VR/GT
Lancer VR/GT
Posts: 212
Joined: Sat Apr 18, 2009 5:35 pm
Location: Cranbourne, VIC, Australia

Postby Scott_VRX_Fan » Mon Jul 27, 2009 1:41 pm

SIR-VRX wrote:Scott, the difference is the bumper, grilles, fog lights and fog light grilles, chrome strip and badges.

It does bolt up, but you might be out of pocket a fair bit as if you only need to replace your bumper then the panel beater would reuse all of your other bits on your new bumper.

Hope that helps mate.


they are going to replace the bumper, top and bottom grilles.

they could re-use the fog light grilles i have on my vrx?

so it would leave the chrome strip being the only difference? surely that isnt too much?
Mods Completed

ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear



Mods To Be Completed

Front Bumper Upgrade



Mods in Development

Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Mon Jul 27, 2009 1:48 pm

The fog light grilles are a different shape and design, and I'm fairly sure the fog light housings themselves are different.

User avatar
Scott_VRX_Fan
Lancer VR/GT
Lancer VR/GT
Posts: 212
Joined: Sat Apr 18, 2009 5:35 pm
Location: Cranbourne, VIC, Australia

Postby Scott_VRX_Fan » Mon Jul 27, 2009 2:03 pm

ahh well, if its too expensive will just leave it as it is :)
Mods Completed

ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear



Mods To Be Completed

Front Bumper Upgrade



Mods in Development

Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Jul 27, 2009 2:08 pm

It's always going to be expensive since they are Ralliart parts. Don't expect the difference to be in the X00s. We're talking at least X000s in difference. Regardless of the discounts we as a club get.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Scott_VRX_Fan
Lancer VR/GT
Lancer VR/GT
Posts: 212
Joined: Sat Apr 18, 2009 5:35 pm
Location: Cranbourne, VIC, Australia

Postby Scott_VRX_Fan » Mon Jul 27, 2009 2:25 pm

just got the quote, they dont need to replace the bumper, can fix it, and repaint it.

hoping they will do me a favour and attach my c-lip and paint it all proper like in one job :)

that works for me as well.
Mods Completed

ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear



Mods To Be Completed

Front Bumper Upgrade



Mods in Development

Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav

User avatar
LAOS
INACTIVE Member Account
Posts: 25
Joined: Wed Jul 15, 2009 9:30 pm
Location: Brisbane, QLD, Australia

Postby LAOS » Mon Jul 27, 2009 7:45 pm

Hey!

I have the Rockford Fosgate system with the red/white-3.5mm MP3 player auxillary input, is this different to the MZ360221EX - MMCS iPod Cable? If so where abouts does this cable plug into and is it the type that charges your ipod and controls the ipod from the stereo unit?

Cheers
2008 red VRX sedan rear spoiler side skirt and front bumper accent trims rockford fosgate/sunroof package

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Jul 27, 2009 7:50 pm

vrxbaby wrote:Hey!

I have the Rockford Fosgate system with the red/white-3.5mm MP3 player auxillary input, is this different to the MZ360221EX - MMCS iPod Cable? If so where abouts does this cable plug into and is it the type that charges your ipod and controls the ipod from the stereo unit?

Cheers


Yes the part MZ360221EX is different. It's an iPod socket cable and plugs into, charging and allowing control of the ipod or iphone3G via the audio control buttons. However, as it mentions there, it only works with a MMCS. So unless you have an MMCS, this won't work for you.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 10 guests