***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

4B11 Engine conrod faluires

Evo X Performance & Modifications.

Moderators: Moderators, Senior Moderators

scott_drake
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 453
Joined: Thu Sep 30, 2010 1:46 pm
Location: world wide

4B11 Engine conrod faluires

Postby scott_drake » Tue Jul 16, 2013 9:36 pm

Here we go, read the 1st parragraff and this will make you very angry if you own a 2010 or older 4b11....


http://www.lancerregister.com/showthread.php?t=419371

User avatar
citris.87
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 488
Joined: Mon May 06, 2013 2:09 pm
Location: Townsville

Postby citris.87 » Wed Aug 21, 2013 8:43 am

Oh that's crap, I have a MY10 lol, I wonder if there is a point at which they changed these? Might be an idea to upgrade now, bit of work involved tho.

User avatar
Seffy
Lancer Legend
Lancer Legend
Posts: 1296
Joined: Tue Aug 14, 2012 12:23 am
Location: Sydney, Australia

Postby Seffy » Wed Aug 21, 2013 9:24 am

Surprised Mitsu didn't do some kind of recall for it.

Then again who knows if they were aware of it. ;_;
Crayon Pop "straight-five engine" dance ftw.

Image

User avatar
citris.87
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 488
Joined: Mon May 06, 2013 2:09 pm
Location: Townsville

Postby citris.87 » Wed Aug 21, 2013 9:51 am

Lucky I still have warranty, Ill upgrade to another evo before the warranty runs out lol.

scott_drake
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 453
Joined: Thu Sep 30, 2010 1:46 pm
Location: world wide

Postby scott_drake » Fri Aug 23, 2013 5:48 pm

MrCJ wrote:Wow and I was thinking of getting an older evo x well looks like ill have to rebuild the bottom end if I end up buying an older one




yeh if u dont want any dramas just make sure you buy a LATE 2011 BUILD onwards

User avatar
LiX
Lancer ES/EX
Lancer ES/EX
Posts: 126
Joined: Mon Nov 09, 2009 7:38 am
Location: Sofia, Bulgaria

Postby LiX » Fri Aug 23, 2013 6:14 pm

What exactly was changed? I didn't saw a pic comparing different rod designs used in the 4B11T.
Image

User avatar
citris.87
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 488
Joined: Mon May 06, 2013 2:09 pm
Location: Townsville

Postby citris.87 » Fri Aug 23, 2013 7:20 pm

LiX wrote:What exactly was changed? I didnt saw a pic comparing different rod designs used in the 4B11T.


It sounds like the materials used, they were using something a little weak, or maybe too thin.

User avatar
LiX
Lancer ES/EX
Lancer ES/EX
Posts: 126
Joined: Mon Nov 09, 2009 7:38 am
Location: Sofia, Bulgaria

Postby LiX » Fri Aug 23, 2013 7:38 pm

citris.87 wrote:[quote:ac062cc1c3=LiX]What exactly was changed? I didnt saw a pic comparing different rod designs used in the 4B11T.[/quote:ac062cc1c3] It sounds like the materials used, they were using something a little weak, or maybe too thin.

We need solid confirmation, not just speculations.
Image

scott_drake
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 453
Joined: Thu Sep 30, 2010 1:46 pm
Location: world wide

Postby scott_drake » Fri Aug 23, 2013 11:28 pm

LiX wrote:[quote:0658cfc903=citris.87][quote:ac062cc1c3=LiX]What exactly was changed? I didnt saw a pic comparing different rod designs used in the 4B11T.[/quote:ac062cc1c3] It sounds like the materials used, they were using something a little weak, or maybe too thin.[/quote:0658cfc903] We need solid confirmation, not just speculations.



Items changed internally stronger design....confirmed

Timing chain (upgraded metal links)
Timing chain top guide (removed)
Timing chain oil squirter (removed)
Valve cover (switched back to plastic)
Camshaft cap (metal)
Spark plugs (unknown reason)
Conrods (stronger metal)



Go look up my faults topics

User avatar
SIX
Post Monster
Post Monster
Posts: 3251
Joined: Fri Nov 16, 2012 9:44 pm
Location: Northern Adelaide

Postby SIX » Fri Aug 23, 2013 11:42 pm

mitsubishi would have to be aware of this , i mean they would have started to see the 4b11T coming through now ???? with how may they sold ... the question i have to ask , is how hard are these cars being driven ???? what modification have been done to them ???? and if it is just a fault on mitsubishi behalf then why have they not recalled them yet and it would be negligent of them not too, there fore putting them in legal striff if something were to go horribly wrong ????

im not doubting the fact that its a fault of the engine , but i want to know what it the root cause to make the engine do this , what stress is it under and what condition make it do this .... because i pretty sure normal road drive to road and legal conditions would not do this .... not doubting your report at all ... but i this all the facts need to be laid on the table .. if we are going to lay blame on and apparent badly built car
1998 MR lancer
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5

scott_drake
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 453
Joined: Thu Sep 30, 2010 1:46 pm
Location: world wide

Postby scott_drake » Sat Aug 24, 2013 10:32 am

Look up, plenty of stock evo with these problems....im getting the old and new jew timing chain tested by a mate of mine who is an engeneer for a mining company to test out the stregnth and write upba report of the old vs new chains then take it to mitshi and get them tobda a recall....mitshi are aware of this problem some accept warranty some claim wear and tear....there is a loop hooe tho ik working on

User avatar
SIX
Post Monster
Post Monster
Posts: 3251
Joined: Fri Nov 16, 2012 9:44 pm
Location: Northern Adelaide

Postby SIX » Sat Aug 24, 2013 12:14 pm

They might be stock stock doesn't mean they haven't been treated like like shit that what I'm saying
1998 MR lancer

2009 CJ lancer sportback

2011 Renault Sport RS250 Trophee Cup

2000 Tommi Makenin Evolution 6.5

User avatar
Craker
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 360
Joined: Sat Jun 02, 2012 9:56 pm
Location: Kings park sydney nsw

Postby Craker » Sat Aug 24, 2013 2:57 pm

Car manufacturers are like that sometimes. Take vw for eg the problems they have had with the gearboxes. I was talking to a guy today that had a golf with a dsg and was having intermittent faults with his box. He even recorded the problems but vw would not do anything until the box totally stopped working.
2011 lancer ralliart sportback
192kw + 370nm at wheels virtual dyno by boostin juice tuning
Hyperflow intercooler, gfb respons bov , gs 3 port
ultimate racing uicp and licp, hyperflow cat back + hi flow cat
MCA blue coilovers and whiteline sway bars
T3 rotors and ds performance pads
enkei sc 22 wheels

scott_drake
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 453
Joined: Thu Sep 30, 2010 1:46 pm
Location: world wide

Postby scott_drake » Sat Aug 24, 2013 7:59 pm

SIX wrote:They might be stock stock doesnt mean they havent been treated like like shit that what Im saying



This is the exact reason the manfacture have redline limit 7300rpm, boost cut off 30psi, engine after run thermo fans if engine temp to high, thernostats etc.....


Return to “Evolution X Performance”

Who is online

Users browsing this forum: No registered users and 11 guests