***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Injen short ram intake (Evo X)

Evo X Performance & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Injen short ram intake (Evo X)

Postby JaCe » Sat May 15, 2010 5:06 pm

Thanks to spareparts and LZY_EYE for taking time out of their Saturday to help do the install of my Injen SRI & upper intercooler pipe kit (SP1899).

Initial Impressions
Surprisingly no loss of low down grunt like I experienced in my Civic when installing the SRI. Car accelerates and revs much more willingly and you can feel the boost coming on. Most noticeable of course is the BOV which was almost non-existent before (it's stock). A very beautiful sound.

Fuel economy has gone down the shoot as I play around with it but am very happy so far. Will update later when my right foot gets a bit less energetic!

Here are a couple of photos:
Image Image Image


Will upload videos shortly to Youtube. Thanks again guys for taking the time to help out.

ps. I purchased the kit from www.lancershop.com and have plenty of praise for their customer support. I know some guys have had negative experiences in getting a quick response to emails but in my experience dealing with Heather, if you just stay online when the US businesses open up (e.g. 10pm Sydney time) you can talk to them live through their website's IM system which definitely gave me a lot of peace of mind.

EDIT: Added another photo I found:

Image
Last edited by JaCe on Fri Dec 03, 2010 12:18 pm, edited 1 time in total.
Image

"A man who stands for nothing, falls for anything."

User avatar
Hecky
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 474
Joined: Sun Dec 06, 2009 4:22 am
Location: Sydney, Australia

Postby Hecky » Sat May 15, 2010 5:23 pm

Looking very nice Jace... :D
HKS/AMS/GFB/MRT/K&N/DBA
Whiteline/Ultra-Racing/Rexpeed/Autometer/Yokohama Racing/Cusco
...and some other stuff which the fun police don't approve of... :)

User avatar
mr_evo
Alumni
Alumni
Posts: 761
Joined: Sun Mar 21, 2010 12:39 pm
Location: Gold Coast
Contact:

Postby mr_evo » Sat May 15, 2010 8:05 pm

looking good Jase, can you take me another shot of your maf sensor?
:D I'm back baby! :D
Enkei - HKS - Turbosmart - Cosworth- TMW - Defi - DeatschWerks

User avatar
Red EVOX
Lancer VR/GT
Lancer VR/GT
Posts: 202
Joined: Sat Nov 28, 2009 8:24 pm
Location: Mt Gambier

Postby Red EVOX » Sat May 15, 2010 9:42 pm

What did it cost you for the SRI?

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Postby JaCe » Sun May 16, 2010 8:50 am

Updated impression: It's very very loud and you can feel the improvement in acceleration however I'm a bit concerned the newfound BOV sound may attract unwanted attention... and it's a STOCK BOV!!!

mr_evo wrote:looking good Jase, can you take me another shot of your maf sensor?


Are you interested in seeing how it mounts or just the general area? Will try to take some photos today at the ClubCJ Meet in Botany!
Image



"A man who stands for nothing, falls for anything."

User avatar
mr_evo
Alumni
Alumni
Posts: 761
Joined: Sun Mar 21, 2010 12:39 pm
Location: Gold Coast
Contact:

Postby mr_evo » Sun May 16, 2010 9:31 am

JaCe wrote:Updated impression: It's very very loud and you can feel the improvement in acceleration however I'm a bit concerned the newfound BOV sound may attract unwanted attention... and it's a STOCK BOV!!!

mr_evo wrote:looking good Jase, can you take me another shot of your maf sensor?


Are you interested in seeing how it mounts or just the general area? Will try to take some photos today at the ClubCJ Meet in Botany!


As soon as you change the air intake the sound of the stock bov will change. As the sound it used to make was just funneled back through the exhaust, now it sends some noise out through the intake, the whooshing and the ptshing noise :) I'm not running my stock bov anymore, im using the turbosmart dual port plumbed back. Also I was just wanting to see how the incorperated the MAF sensor into the ram intake... looks good
:D I'm back baby! :D
Enkei - HKS - Turbosmart - Cosworth- TMW - Defi - DeatschWerks

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Postby JaCe » Sun May 16, 2010 8:27 pm

mr_evo wrote:As soon as you change the air intake the sound of the stock bov will change. As the sound it used to make was just funneled back through the exhaust, now it sends some noise out through the intake, the whooshing and the ptshing noise :) I'm not running my stock bov anymore, im using the turbosmart dual port plumbed back. Also I was just wanting to see how the incorperated the MAF sensor into the ram intake... looks good


I'm surprised how much louder the BOV is now that the intake is installed. It's at least 3x or 4x louder.

Here are some new pics of the Evo X Injen SRI + UICP kit taken today (at higher resolution too):
Image Image Image Image Image

Hope this helps!
Image



"A man who stands for nothing, falls for anything."

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Postby JaCe » Mon May 17, 2010 12:09 am

I've uploaded a video from in-car driving of how it sounds :)

http://www.youtube.com/watch?v=wumRBaelKQk
Image



"A man who stands for nothing, falls for anything."

User avatar
WASABI
INACTIVE Member Account
Posts: 43
Joined: Tue Apr 27, 2010 3:31 pm
Location: Sydney, Australia

Postby WASABI » Wed May 19, 2010 4:06 pm

JaCe wrote:I've uploaded a video from in-car driving of how it sounds :)

http://www.youtube.com/watch?v=wumRBaelKQk


Sounds really good mate :D

That's the way a turbo car should sound ;)

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Postby JaCe » Wed May 19, 2010 7:59 pm

It sounds a LOT like my mate's R34 GTT now... it's alot louder.
Image



"A man who stands for nothing, falls for anything."

briansharque
Lancer Newbie
Lancer Newbie
Posts: 89
Joined: Fri May 14, 2010 12:06 am
Location: WA, Perth

Postby briansharque » Wed May 19, 2010 8:57 pm

Cool...sounds good wish i am driving RA too....
VRX Sportback

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Postby JaCe » Thu May 20, 2010 10:14 am

You can always put intake & exhaust on any car and it'll sound very different.
Image



"A man who stands for nothing, falls for anything."

briansharque
Lancer Newbie
Lancer Newbie
Posts: 89
Joined: Fri May 14, 2010 12:06 am
Location: WA, Perth

Postby briansharque » Thu May 20, 2010 3:19 pm

But i prefer the sound with turbo and BOV lol....
VRX Sportback

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Postby JaCe » Thu May 20, 2010 5:07 pm

Have to admit it is very addictive!
Image



"A man who stands for nothing, falls for anything."

briansharque
Lancer Newbie
Lancer Newbie
Posts: 89
Joined: Fri May 14, 2010 12:06 am
Location: WA, Perth

Postby briansharque » Thu May 20, 2010 10:33 pm

yeah....good on you...
VRX Sportback


Return to “Evolution X Performance”

Who is online

Users browsing this forum: No registered users and 11 guests