***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Getting Closer :D - Opinions so far?

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Getting Closer :D - Opinions so far?

Postby Ronan.Butler11 » Tue Dec 13, 2016 8:32 pm

Exhaust - Check
Rims - Check
Plate Lights - Check
Image

Im personally in love with it, yet if any has suggestions i should add to the 'to do' list i'm open to suggestions.
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Re: Getting Closer :D - Opinions so far?

Postby lancerdarryl » Tue Dec 13, 2016 8:50 pm

Wheels set it off quite well.
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"

User avatar
Nate N
Lancer Newbie
Lancer Newbie
Posts: 53
Joined: Fri Apr 05, 2013 1:45 pm
Location: Adelaide

Re: Getting Closer :D - Opinions so far?

Postby Nate N » Tue Dec 13, 2016 8:54 pm

Looking good mate. Just need an RA rear bar now to complete it!

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: Getting Closer :D - Opinions so far?

Postby Ronan.Butler11 » Tue Dec 13, 2016 8:59 pm

was looking at one,
not sure if the exhaust will fit on the RA slot. looks like the RA has the exhausts closer together than mine
Plus i reckon it looks good stock, once i get the bumper repaired it will look better hahaha
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

User avatar
Nate N
Lancer Newbie
Lancer Newbie
Posts: 53
Joined: Fri Apr 05, 2013 1:45 pm
Location: Adelaide

Re: Getting Closer :D - Opinions so far?

Postby Nate N » Tue Dec 13, 2016 9:07 pm

Maybe not, the XForce tips do seem further outboard. That said, a rear bumper with appropriate cut-outs would definitely make the dual exhaust stand out.

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: Getting Closer :D - Opinions so far?

Postby Ronan.Butler11 » Tue Dec 13, 2016 9:17 pm

yeah, it was the original plan. the current bumper doesn't show the cut out for the stock exhaust much, so leaving it as is looks pretty good
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

buchani
Lancer ES/EX
Lancer ES/EX
Posts: 118
Joined: Tue Feb 26, 2013 12:04 am
Location: Ipswich

Re: Getting Closer :D - Opinions so far?

Postby buchani » Tue Dec 13, 2016 10:05 pm

coil overs

User avatar
Dannn
Lancer ES/EX
Lancer ES/EX
Posts: 164
Joined: Sat Jul 09, 2016 10:35 pm
Location: Brisbane

Re: Getting Closer :D - Opinions so far?

Postby Dannn » Tue Dec 13, 2016 11:25 pm

Merlin tune.

How much was your cat back? Did you git it yourself or by them?

What have you done inside?

Do you have a full size spare? Thought about a custom boot floor? I made one with the mitsi badge cut through with led strips under. Looks mint!
Merlinised

User avatar
Mystique
Lancer MASTER
Lancer MASTER
Posts: 1729
Joined: Mon Sep 30, 2013 8:28 pm
Location: Launceston, Tasmania, Australia

Re: Getting Closer :D - Opinions so far?

Postby Mystique » Wed Dec 14, 2016 1:24 pm

Coilovers would finish it nicely with a RA bar ;)

RA bars on hatchbacks are so pretty! <3
Daily: My14 Lancer LX
Weekender: 2009 MY09 Ralliart Hatch

Image
My Mod Thread: viewtopic.php?p=324612#324612
Instagram: http://instagram.com/mitsii_lx

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: Getting Closer :D - Opinions so far?

Postby Ronan.Butler11 » Wed Dec 14, 2016 9:44 pm

Dannn wrote:Merlin tune.

How much was your cat back? Did you git it yourself or by them?

What have you done inside?

Do you have a full size spare? Thought about a custom boot floor? I made one with the mitsi badge cut through with led strips under. Looks mint!


Was a 2.5" axle back for $450 from X Force, put in myself

Inside - led dome lights, hoping to get dash etc done blue or a frost white. Looking for an asx cluster to put in

Was looking at getting a half decent tire to chuck on a stock rims and have a full size spare, havnt got around to it.

Was looking to get a mitsu badge that i could stitch in or something, rather than get a whole new liner. Do you have a contact for who did yours and what specifically it was?

Thanks mate
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: Getting Closer :D - Opinions so far?

Postby Ronan.Butler11 » Wed Dec 14, 2016 9:45 pm

Mystique wrote:Coilovers would finish it nicely with a RA bar ;)

RA bars on hatchbacks are so pretty! <3


Kicking myself over that, my exhausts are too wide for the RA bumper, would have to get them adjusted, maybe a later project
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

User avatar
Dannn
Lancer ES/EX
Lancer ES/EX
Posts: 164
Joined: Sat Jul 09, 2016 10:35 pm
Location: Brisbane

Re: Getting Closer :D - Opinions so far?

Postby Dannn » Wed Dec 14, 2016 10:04 pm

I literally printed the mitsi logo (full A4 size) and stenciled it onto ply and cut with jigsaw. Bought some auto carpet felt and wrapped it, got a piece of perspex 30x30 and screwed it on, led stripped it and wired it to the boot light so when you open the boot it turns on.
Merlinised

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: Getting Closer :D - Opinions so far?

Postby Ronan.Butler11 » Thu Dec 15, 2016 5:09 pm

Does it stick out much? thinkings of using 3mm ply and a blue mitsi logo
If you have a picture could you post it? want to know if im doing it right hahaha
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

User avatar
Dannn
Lancer ES/EX
Lancer ES/EX
Posts: 164
Joined: Sat Jul 09, 2016 10:35 pm
Location: Brisbane

Re: Getting Closer :D - Opinions so far?

Postby Dannn » Thu Dec 15, 2016 6:14 pm

http://m.imgur.com/a/dVKUR

I built a 3 piece raised boot. Middle part with the logo obviously.
Merlinised

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: Getting Closer :D - Opinions so far?

Postby Ronan.Butler11 » Thu Dec 15, 2016 7:09 pm

Looks sick, might have a look into it. i get free off cuts of timber from work, might grab some ply and have a go. The led looks good as well. is there a specific carpet you need to match the rest of the boot area?
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*


Return to “General Talk”

Who is online

Users browsing this forum: No registered users and 44 guests