***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Brake Rotor/Pads Recommendations?

All Brake Modifications.

Moderator: Senior Moderators

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Brake Rotor/Pads Recommendations?

Postby bumblebee » Thu Jun 13, 2019 8:38 pm

Lancer1993 wrote:Thanks, should have around $800 to spend on them soon.


For about $800 you can buy new pads and rotors off these guys delivers to your door to fit out not one but two Lancers!

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: Brake Rotor/Pads Recommendations?

Postby Lancer1993 » Fri Jun 14, 2019 9:41 am

I've been considering these which are are over $400 for the 4 rotors.

https://www.vmaxbrakes.com.au/jtype-fit ... l-vr-x-200
Image
My rides CJ VRX - CC coupe

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Brake Rotor/Pads Recommendations?

Postby bumblebee » Fri Jun 14, 2019 11:20 am

https://rover.ebay.com/rover/0/0/0?mpre ... 3097410135

Rotor and semi metallic pads Inc delivery for front for RA under $250
Work a treat

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: Brake Rotor/Pads Recommendations?

Postby Lancer1993 » Fri Jun 14, 2019 11:49 am

$250 per end, so $500 total?

But I like the look of the other ones, its the same style 'slot' or what ever they use in the Supercar series, so in my mind they should work better :lol:
Image
My rides CJ VRX - CC coupe

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Brake Rotor/Pads Recommendations?

Postby bumblebee » Fri Jun 14, 2019 1:08 pm

As a general rule of thumb the rear end is cheaper then the front to get new rotors/pads

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Brake Rotor/Pads Recommendations?

Postby bumblebee » Fri Jun 14, 2019 1:46 pm

295mm RA rotor/ caliper behind stock 16" wheel https://imgur.com/a/GVdAohK

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: Brake Rotor/Pads Recommendations?

Postby Lancer1993 » Fri Jun 14, 2019 2:25 pm

Are they a directional design, so left and right?

I'll keep them in mind but I would like to hear from anyone who has experience with the Vmax ones? Over all they shouldn't be much more than $600 for the 4 rotors and pads.

I'll also be asking the dealer where I get my service if they fit parts I supply and how much, while I like DIY and should be able to do the job its not something you want to cut corners on.
Image
My rides CJ VRX - CC coupe

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: Brake Rotor/Pads Recommendations?

Postby Lancer1993 » Fri Jun 14, 2019 7:00 pm

OMG these look cool! and expensive :(
Image
Image
My rides CJ VRX - CC coupe

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Brake Rotor/Pads Recommendations?

Postby bumblebee » Sat Jun 15, 2019 12:23 pm

And no doubt an equally impressive price tag to go with it

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: Brake Rotor/Pads Recommendations?

Postby Lancer1993 » Sat Jun 15, 2019 2:10 pm

Maybe get the angle grinder out to modify the stock ones LOL

On the cross drill v slots or dimples I was told the reason racing cars don't cross drill is it weakens the rotor, slots are much better and its not the slots but the internal vents that matter when it come to mounting them. That said most there days are made to fit either side.

Also is there any option to fit vented rotors on the rear without changing the whole setup? Not that its needed on a FWD Lancer like mine.
Image
My rides CJ VRX - CC coupe

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Brake Rotor/Pads Recommendations?

Postby bumblebee » Sun Jun 16, 2019 7:06 am

Don't forget when racing your brakes will get one heck of a work out very dissimilar to the street
And depending on what kind of racing it is will depend on what the rotors/ pads are made out of in the first place as.well.
If there is a vented rear rotor for the rear I haven't come across one
Mind you I haven't deliberately gone out of my way to find one nor seen one in my searching I have done
However
This isn't to say they don't exist
If your really serious I suggest you get some RA front calipers of a wreck and shove those under the front and some decent rotor/pads as previously mentioned
All the info you need about that is on this forum via searching

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: Brake Rotor/Pads Recommendations?

Postby Lancer1993 » Sun Jun 16, 2019 10:26 am

Wait I thought the 2.4 VRX had the same size callipers as the RA, some of the sites I've checked list the RA and VRX for the same size rotors.

Don't like my VRX needs better brakes as such, I've never had an issue with them and not planning on using it as a track day car.
Image
My rides CJ VRX - CC coupe

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Re: Brake Rotor/Pads Recommendations?

Postby lancerdarryl » Sun Jun 16, 2019 10:38 am

Ralliart calipers are twin piston whereas the VRX is a single piston caliper
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"

User avatar
Skrallex
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 376
Joined: Fri Mar 18, 2016 8:28 pm
Location: Australia

Re: Brake Rotor/Pads Recommendations?

Postby Skrallex » Sun Jun 16, 2019 11:43 am

RA and VRX have same rear calipers. 2.0 NA (ES, etc.) rear brake pads WILL NOT fit in a VRX (except probably the MY08 as that wasn't the 2.4L from memory).

Does anyone know if the RA front calipers (twin piston) would just bolt onto the hub of a 2.4L VRX? I hadn't really considered it, but if you could get a cheap set second-hand, it may be an easy upgrade. If you take your car to a mechanic for new brake pads obviously it's going to make their life more difficult though haha.

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: Brake Rotor/Pads Recommendations?

Postby Lancer1993 » Sun Jun 16, 2019 9:04 pm

Thanks for the clarification.

I'd only do a RA upgrade if the price was right and the timing, right now its not needed.
Image
My rides CJ VRX - CC coupe


Return to “Brakes”

Who is online

Users browsing this forum: No registered users and 20 guests