***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Denzza's Lancer RX 2.0 4B11T swap. **2015 UPDATE**

Evo X Performance & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Wed Nov 12, 2014 5:41 pm

Damir wrote:Nicceee Boost for dayyzzz


hahah yeah LOL

LiX wrote:[quote:7a9a32d25d=denzza]THANKS TO MY FRIEND IN GREECE !!! Lix[/quote:7a9a32d25d] Actually, Im Bulgarian, not Greek. ;)


Welllllllll that was friken awkward haha not sure why i thought you were from there. defs fried !! My mistake :P

pneill wrote:Nice work... how long does e85 last you ? 7 days ? (week)


mmm depen how much i drive. But it gets me around 350kms per tank.

SLIPKNUT wrote:I think i saw you at Techsport a couple of months ago! car looked sweet :D


Maybe haha cant remember , maybe picking up some parts :D

fisheye2 wrote:Im guessing the e85 would last 2-3hrs with spirited driving :D


Yeah, havent tried that long. But it does alright :) but daym its bad haha
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85
FULL EVO X TURBO SETUP
APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |
TUNED BY BEEBLE | EXEDY H/D CLUTCH
BC RACING BR COILOVERS
Image

User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Mon Apr 27, 2015 9:53 pm

UPDATE TIME!!!!!! ITS BEEN A TAD WHILE SINCE IVE UPDATED :)


Bought Hard race stabilizer links. Just cause blue lol

ImageImage


Photoshoot with my mate. Had to get some new shots :p

Debadged the whole car. Just for a cleaner look.

Image

Cleaned up the engine bay a little. Also new BOV! Turbosmart KOMPACT Dual port. Them sneezes!

Image



IT WAS TIME TO GET SERIOUS. GAUGES!! HATE NOT KNOWING WHAT THE CAR IS DOING. BETTER SAFE THAN SORRY :P

FOREVER DRIVER A-PILLAR DUAL GAUGE POD WITH INNOVATE MOTORSPORTS GAUGES.

HAD TO THE AFR GAUGE AND OIL/PRESSURE GAUGE. THE BOTTOM ONE IS A 2 IN 1 GAUGE :)

INSTALLATION WASNT TOO BAD SINCE I HAVE SOME KNOWLEDGE IN THIS AREA :P DONT ATTEMPT THIS IF YOU DONT KNOW WHAT YOURE DOING HAHA
I USED A MISHIMOTO SANDWICH PLATE SO I HAVE ACCESS TO OIL.
WIRING UP WASNT TOO BAD BUT AFTER IT WAS ALL WIRED UP. GAUGES!

ImageImage

BOOM! SUCCESS :D

ImageImage
Image


I THEN DECIDED TO GET MY WHEELS POWDER COATED BY GD SANDBLASTING & POWDERCOATING.

SPACE BLUE !!!!

Image

FEW SHOTS OF THEM ON THE CAR WITH SNEAKY CARS :P

ImageImageImage


AFTER 2 WEEKS, IVE REALISED MY OIL WAS GETTING A TAD TOO HOT FOR MY LIKING.

SO IT WAS TIME FOR AN OIL COOLER. I USED THE STOCK EVO X COOLER AND LINES. PLUG N PLAY

BIT OF MESSING AROUND TO MAKE THE WASHER BOTTLE STILL WORK AND STUFF :P

AND OF COURSE, PAINTED BLACK!!

ImageImage


GREAT OCEAN ROAD CRUISE WITH SOME OF THE NICEST E46 M3'S!

Image



STAY TUNED FOR MORE UPDATES :P THERE IS ALWAYS MORE !
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85

FULL EVO X TURBO SETUP

APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |

TUNED BY BEEBLE | EXEDY H/D CLUTCH

BC RACING BR COILOVERS

Image

User avatar
JustinR
Site Admin
Site Admin
Posts: 1954
Joined: Sat Jan 22, 2011 6:26 pm
Location: Sutherland Shire, Sydney

Postby JustinR » Tue Apr 28, 2015 10:26 am

Very nice mate! I'll be taking a similar route with gauges and oil cooler. Curious though, how did you get the oil cooler to fit?

User avatar
rokpapaziz
Lancer Legend
Lancer Legend
Posts: 1344
Joined: Sat Aug 13, 2011 12:18 am
Location: Brisbane

Postby rokpapaziz » Tue Apr 28, 2015 12:16 pm

Can you give me more info on the oil temp gauge and sensor? I'm pretty sure I have the same Mishimoto sandwich plate, but no idea how to use it.

User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Tue Apr 28, 2015 10:12 pm

fisheye2 wrote:Nice work bro. Bet its easy to keep up with the m3s now... :D


HAHA thats man, yeah its easier now :p

JustinR wrote:Very nice mate! Ill be taking a similar route with gauges and oil cooler. Curious though, how did you get the oil cooler to fit?


Just need the stock evo x brackets and oil cooler. Plug and play :)

rokpapaziz wrote:Can you give me more info on the oil temp gauge and sensor? Im pretty sure I have the same Mishimoto sandwich plate, but no idea how to use it.


Yeah man, what would you like to know ?

Its pretty much straight forward. Look at my set up and plug it in that way. Shouldnt have any issues.
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85

FULL EVO X TURBO SETUP

APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |

TUNED BY BEEBLE | EXEDY H/D CLUTCH

BC RACING BR COILOVERS

Image

User avatar
JustinR
Site Admin
Site Admin
Posts: 1954
Joined: Sat Jan 22, 2011 6:26 pm
Location: Sutherland Shire, Sydney

Postby JustinR » Wed Apr 29, 2015 8:23 am

But our washer bottle is in the way, so how did you manage to fit both?

User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Wed Apr 29, 2015 9:04 pm

JustinR wrote:But our washer bottle is in the way, so how did you manage to fit both?


Look closer to what i used :p
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85

FULL EVO X TURBO SETUP

APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |

TUNED BY BEEBLE | EXEDY H/D CLUTCH

BC RACING BR COILOVERS

Image

User avatar
rokpapaziz
Lancer Legend
Lancer Legend
Posts: 1344
Joined: Sat Aug 13, 2011 12:18 am
Location: Brisbane

Postby rokpapaziz » Sat May 02, 2015 8:48 am

Image

Image

Image

OK I have this sandwich plate which looks sort of similar. Did you install the gauge sensor and plug the other one of threaded holes with a bolt or something?

Sorry for the thread jack! :P

User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Sun May 03, 2015 10:39 am

Ok so your sandwich plate is for a oil cooler by the look of it. But yeah the sensor should go in one of the holes, if they are the same size haha

The other holes on mine were already blocked with screws. But if you don't have any, defiantly block them up :)
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85

FULL EVO X TURBO SETUP

APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |

TUNED BY BEEBLE | EXEDY H/D CLUTCH

BC RACING BR COILOVERS

Image

User avatar
the sam
Lancer ES/EX
Lancer ES/EX
Posts: 118
Joined: Wed Dec 18, 2013 7:35 pm
Location: Sydney, Australia

Postby the sam » Sun May 03, 2015 12:13 pm

Make sure you put the sensor in the high pressure side of the sandwich plate too to make sure it's actually getting the flowing oil temps. I can't remember which one is the high pressure side though!

Sorry to hijack!
230kw/430nm @ 24psi on E85
12.191 @ 108.81mph - Fastest stock turbo ralliart in Australia
www.facebook.com/BoostinJuiceTuningSydney
www.clubcj.net/viewtopic.php?p=369141#369141

User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Sun May 03, 2015 9:46 pm

the sam wrote:Make sure you put the sensor in the high pressure side of the sandwich plate too to make sure its actually getting the flowing oil temps. I cant remember which one is the high pressure side though! Sorry to hijack!


Arnt both sides the same haha ?
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85

FULL EVO X TURBO SETUP

APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |

TUNED BY BEEBLE | EXEDY H/D CLUTCH

BC RACING BR COILOVERS

Image

User avatar
the sam
Lancer ES/EX
Lancer ES/EX
Posts: 118
Joined: Wed Dec 18, 2013 7:35 pm
Location: Sydney, Australia

Postby the sam » Mon May 04, 2015 9:46 am

Nup. One fitting will be in, the other will be an out - same as how the oil filter works. I just can't remember if the inner thread or the outer cavity is the high pressure feed (into oil filter).
230kw/430nm @ 24psi on E85

12.191 @ 108.81mph - Fastest stock turbo ralliart in Australia

www.facebook.com/BoostinJuiceTuningSydney

www.clubcj.net/viewtopic.php?p=369141#369141


Return to “Evolution X Performance”

Who is online

Users browsing this forum: No registered users and 1 guest