***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Selling 4-1 Street design extractors

Want to sell something, Post it up and sell it here. *Conditions Apply- Please read - http://clubcj.net/viewtopic.php?t=2085

Moderators: Moderators, Senior Moderators

Mooman
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 340
Joined: Wed Aug 12, 2015 12:29 pm
Location: Melbourne, Australia

Selling 4-1 Street design extractors

Postby Mooman » Sun Nov 12, 2017 9:57 am

ITEM: RPW 4-1 Street extractors

LOCATION: Melbourne, Victoria (Templestowe).

ITEM CONDITION: Used, shows signs of wear/corrosion. Had been painted with high temp charcoal paint that is chipping/flaking in parts.

REASON FOR SELLING: Removed from car as no longer wanted.

PRICE AND PAYMENT CONDITIONS: No price listed as I'll accept offers + p and h, willing to let go for cheap.

SHIPPING AND POSTAL ARRANGEMENTS: Will send via parcel post to anywhere in Australia.

EXTRA INFO: RPW website for extractors
Even though sold to fit 4B10 or 4B11 engines it is most likely suited to 4B12 engines as the central support flange is the same as found on the stock exhaust manifold of the 4B12 not the 4B11-10 (Clamshell). Best suited for manual cars and power production at mid to high range.

CONTACT INFO: Reply to thread, PM or email CRFONE@Gmail.com.

Image

Image

User avatar
Shaun Patterson
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 381
Joined: Fri Sep 05, 2014 9:59 pm
Location: Rockhampton Australia

Re: Selling 4-1 Street design extractors

Postby Shaun Patterson » Sun Nov 12, 2017 1:10 pm

pmd

Mooman
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 340
Joined: Wed Aug 12, 2015 12:29 pm
Location: Melbourne, Australia

Re: Selling 4-1 Street design extractors

Postby Mooman » Thu Nov 16, 2017 6:12 am

Just want to re-visit this thread as initial interest seems to have subsided.

I will now set the price to $100 which will include postage to anywhere in Australia.

Anyone who had previously contacted me will have priority if they decide to purchase.

Mooman
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 340
Joined: Wed Aug 12, 2015 12:29 pm
Location: Melbourne, Australia

Re: Selling 4-1 Street design extractors

Postby Mooman » Mon Nov 27, 2017 5:45 am

Dropping the asking price to $80 including postage, this is my final offer.

Postage will be around $30 making the cost of the extractors only $50! A good price to experiment if they work for you.

Please contact me via PM if interested.

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Selling 4-1 Street design extractors

Postby bumblebee » Mon Nov 27, 2017 6:01 am

I have the same ones on my lancer i bought new from RPW in perth. I wrapped mine in thermal heat wrap before putting it on the car. These plus a Merlin tune and its a whole new car to drive. The price that Moonman has these at is a give away. If you have been thinking about extractors then buy these you won't be disappointed

User avatar
sarusa
Lancer Legend
Lancer Legend
Posts: 1287
Joined: Fri Sep 04, 2015 3:22 pm
Location: melbourne

Re: Selling 4-1 Street design extractors

Postby sarusa » Tue Nov 28, 2017 12:35 pm

Am I wrong? 4-1 extractors I understand are more suited to track rather then day to day driving. Power rather then torque.

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Re: Selling 4-1 Street design extractors

Postby aspir3 » Tue Nov 28, 2017 12:58 pm

sarusa wrote:Am I wrong? 4-1 extractors I understand are more suited to track rather then day to day driving. Power rather then torque.

Yes you are correct

Mooman
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 340
Joined: Wed Aug 12, 2015 12:29 pm
Location: Melbourne, Australia

Re: Selling 4-1 Street design extractors

Postby Mooman » Tue Nov 28, 2017 2:09 pm

It's a little more complicated than just format. Things like length and diameter of pipes need to be taken into consideration. A 4-2-1 is no good if the joins don't respect the firing order and assist exhaust scavenging. Likewise a 4-1 system with large diameter and short pipes will also not scavenge as well.

These ones I'm selling (close to being sold) are designed (according to sellers website) to be street usable, smaller diameter and shorter pipes than a track focused set.

They will however be better suited (power and torque) to higher RPM than a stock setup, something better handled by manual than CVT.

WhiteLancer14
Lancer Learner
Lancer Learner
Posts: 9
Joined: Wed Oct 25, 2017 10:41 pm

Re: Selling 4-1 Street design extractors

Postby WhiteLancer14 » Fri Jan 26, 2018 10:29 pm

Did you ever sell them?

burfadel
Lancer Ralliart
Lancer Ralliart
Posts: 526
Joined: Fri Oct 30, 2015 4:22 pm
Location: Adelaide, Australia

Re: Selling 4-1 Street design extractors

Postby burfadel » Sat Jan 27, 2018 6:28 am

I haven't sold mine yet.
I might add a pic of my car once I style the exterior a bit :).

Mooman
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 340
Joined: Wed Aug 12, 2015 12:29 pm
Location: Melbourne, Australia

Re: Selling 4-1 Street design extractors

Postby Mooman » Sat Jan 27, 2018 2:10 pm

Was close to being sold but buyer went quiet and I couldn't be bothered pushing the sale.

kg4995
Lancer Learner
Lancer Learner
Posts: 2
Joined: Fri Aug 03, 2018 6:37 am

Re: Selling 4-1 Street design extractors

Postby kg4995 » Mon Aug 06, 2018 11:54 am

Still available? Also would you ship to US?


Return to “For Sale Section”

Who is online

Users browsing this forum: No registered users and 1 guest