***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

* Mitsubishi OEM Parts for ClubCJ Members *

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
lantourismo
Lancer Legend
Lancer Legend
Posts: 1248
Joined: Sat Apr 13, 2013 8:32 pm
Location: Perth, Australia

Postby lantourismo » Thu Feb 13, 2014 7:41 pm

Zaphod wrote:Hey ofey! any idea what freight would cost to the GC? (and how much for these special long clips?) Cheers!

Send ofey a pm with your details the item details, I paid 20$ to Perth might be little bit cheaper to qld.

User avatar
KaiKat
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 348
Joined: Thu Jan 10, 2013 4:51 pm
Location: Brisbane, Aus

Postby KaiKat » Mon Mar 31, 2014 10:19 pm

Hey Ofey,

This may have been asked before but I couldn't find it anyway.

I'm wanting to move my number plate over to the side on my Evo X MR (like everyone wants too haha)
and i'm wondering if you can get a replacement OEM middle section in the MR grey colour without the number plate holes and how much approx it would be please?

Thanks :)

Just to be clear haha see pic below:

Image
TrojanHorse: Kyle, the red rocket!

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Postby lancerdarryl » Tue Apr 01, 2014 1:41 am

KaiKat wrote:Hey Ofey, This may have been asked before but I couldnt find it anyway. Im wanting to move my number plate over to the side on my Evo X MR (like everyone wants too haha) and im wondering if you can get a replacement OEM middle section in the MR grey colour without the number plate holes and how much approx it would be please? Thanks :) Just to be clear haha see pic below: [img:b0849d53a2]http://www.clubcj.net/img/images/20140331231706_142_010D00357Tedit3.png[/img:b0849d53a2]

Kyle I bought one a little while ago with the same plan.....unfortunately they come pre-drilled.The cost was around $170 from memory.
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"

User avatar
lantourismo
Lancer Legend
Lancer Legend
Posts: 1248
Joined: Sat Apr 13, 2013 8:32 pm
Location: Perth, Australia

Postby lantourismo » Tue Apr 01, 2014 2:50 am

I guess you could get a panel beater to fill it in, or wrap the section in cf and be careful washing that car

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Tue Apr 01, 2014 9:10 am

@KaiKat: I've PM-ed you.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Tue Apr 01, 2014 9:14 am

rainbow pen on facebook should have what your looking for.
or even try ebay you can find a cool CF looking one on there
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster) ;-)

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Apr 10, 2014 7:25 am

To the best of my knowledge, NO you can't just buy the enclosure from Mits.

Try the wreckers.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
el3ment
Lancer Legend
Lancer Legend
Posts: 1050
Joined: Thu Nov 18, 2010 8:01 am

Postby el3ment » Wed Apr 16, 2014 5:34 pm

unsure if this has been asked before Irving, but do Mitsubishi sell the HID washer kit at all? ie the popup unit, water pump, water bottle, wiring harness etc etc?

Thinking of converting to HID headlights, and need the kit to make it legal...
AK 3" Single tip exhaust | 18x9 CST Zero 1 Hyper wheels |BC-BR Coilovers | UR UICP | Synapse DV | 3-pod A-Pillar | Adj. rear camber & toe arms | AK Aluminium undertray

Image

User avatar
lantourismo
Lancer Legend
Lancer Legend
Posts: 1248
Joined: Sat Apr 13, 2013 8:32 pm
Location: Perth, Australia

Postby lantourismo » Wed Apr 16, 2014 7:51 pm

el3ment wrote:unsure if this has been asked before Irving, but do Mitsubishi sell the HID washer kit at all? ie the popup unit, water pump, water bottle, wiring harness etc etc? Thinking of converting to HID headlights, and need the kit to make it legal...

Think i saw some of what your asking about on the rainbow pen page, I thought levellers where required, washers optional?

User avatar
zedd82
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Tue May 12, 2009 11:13 am
Location: Brisbane, QLD, Australia

Postby zedd82 » Wed Apr 16, 2014 9:47 pm

Washers are also required in Australia.

Someone has asked about the parts for the washers before. I think it was about $200ish for the hoses and fittings etc plus the washers on top stories of that
Club CJ's fastest and most powerful Ralliart 349.8kw/ 469hp atw 12.068s 187km/h

User avatar
anghel132
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 314
Joined: Sat Feb 09, 2013 5:18 pm
Location: Brisbane, Australia

Postby anghel132 » Thu Apr 17, 2014 8:46 am

grab em off wreckers maybe?

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Apr 17, 2014 11:11 am

The washer system is NOT cheap new.

You need :
2 X washer covers (comes only in one colour - White) ~ A$40 each
2 X Arms ~ A$135 each
1 X hose joint ~ A$45
1 X Modified washer bottle ~ A$40
1 X pump system ~ A$85

I don't know what more of the wiring is needed as well.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
el3ment
Lancer Legend
Lancer Legend
Posts: 1050
Joined: Thu Nov 18, 2010 8:01 am

Postby el3ment » Thu Apr 17, 2014 4:47 pm

ofey wrote:The washer system is NOT cheap new. You need : 2 X washer covers (comes only in one colour - White) ~ A$40 each 2 X Arms ~ A$135 each 1 X hose joint ~ A$45 1 X Modified washer bottle ~ A$40 1 X pump system ~ A$85 I dont know what more of the wiring is needed as well.


seems reasonable. Just need to figure out the wiring harness...

Wonder if one can just go to Mitsubishi and say... install this for me.. :)
AK 3" Single tip exhaust | 18x9 CST Zero 1 Hyper wheels |BC-BR Coilovers | UR UICP | Synapse DV | 3-pod A-Pillar | Adj. rear camber & toe arms | AK Aluminium undertray

Image


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 2 guests