Code No.U0001 Bus Off (CAN-C)
| caution |
- If there is any problem in the CAN bus lines, an incorrect diagnosis code may be set. Prior to this diagnosis, always diagnose the CAN bus lines.
- Before replacing the ECU, ensure that the power supply circuit, the earth circuit and the communication circuit are normal.
|
DIAGNOSTIC FUNCTION
When AFS-ECU is returned from the bus-off state or when the bus-off error is indicated to the AFS-ECU state, AFS warnings are displayed on the multi information display and code No. U0001 (CAN-C) is stored.
COMMENTS ON TROUBLE SYMPTOM
The AFS-ECU may have a malfunction, or the AFS-ECU power supply or earth circuit may have a problem.
PROBABLE CAUSES
- Malfunction of the AFS-ECU
- Malfunction of wiring harness or connector
DIAGNOSIS PROCEDURE
STEP 1. M.U.T.-III CAN bus diagnostics
Use the M.U.T.-III to diagnose the CAN bus lines.
Q.
Is the check result normal?
Go to Step 2.
Repair the CAN bus line (Refer to GROUP 54C - Troubleshooting 
).
STEP 2. Check whether the diagnosis code is reset.
Check again if the diagnosis code is set to the AFS-ECU.
|
|
(1)Erase the diagnosis code.
|
|
|
(2)Turn the ignition switch from "LOCK" (OFF) position to "ON" position.
|
|
|
(3)Check if diagnosis code is set.
|
Q.
Is the diagnosis code set?
Replace the AFS-ECU.
The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to use Troubleshooting/inspection Service Points - How to Cope with Intermittent Malfunction ).