***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* X-Factor Leather Seat Cover CCJ GB - Apr 2011

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sun Jun 05, 2011 2:47 pm

It's your call.

I have no clue... .
When I bought my folding mirrors from shadows, I did not get insurance.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
JustinR
Site Admin
Site Admin
Posts: 1954
Joined: Sat Jan 22, 2011 6:26 pm
Location: Sutherland Shire, Sydney

Postby JustinR » Sun Jun 05, 2011 4:50 pm

Yeah piece of mind is good, i just sent you the extra money to cover it :)

Sto0ge
Lancer Newbie
Lancer Newbie
Posts: 45
Joined: Tue Oct 12, 2010 11:23 am
Location: Melbourne, Australia

Postby Sto0ge » Sun Jun 05, 2011 5:05 pm

just to confirm, it may not have come through yet but i have paid as well :)

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Tue Jun 14, 2011 2:00 pm

This is proving to be a real bottle neck. For those who have NOT paid, please pay ASAP!


EOI List *Bold => Form Completed
1. Alileighju - QLD *PAID = A$837*
2. Latino_Ralliart - NSW
3. Iribia - NT *PAID = A$837*
4. chooks - NSW *PAID = A$837*
5. JustinR - NSW *PAID = A$837*
6. Miss SX - QLD
7. sto0ge - VIC *PAID = A$835*
8. BR14AN - NSW
9. andrewh88 - VIC *PAID = A$837*
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
JustinR
Site Admin
Site Admin
Posts: 1954
Joined: Sat Jan 22, 2011 6:26 pm
Location: Sutherland Shire, Sydney

Postby JustinR » Tue Jun 14, 2011 3:24 pm

Cmon guys please pay up.. your holding up the rest of us :(

User avatar
INVUR-1
Lancer VR/GT
Lancer VR/GT
Posts: 261
Joined: Thu May 19, 2011 11:13 pm
Location: Australia, Melbourne

Postby INVUR-1 » Tue Jun 14, 2011 8:50 pm

AGREED, Please pay you holding up everyone :(
(cj-black) oO~`AnDreW Black CJ VIC`~Oo (cj-black)

User avatar
BR14AN
Lancer Ralliart
Lancer Ralliart
Posts: 650
Joined: Thu Jan 21, 2010 10:53 pm
Location: Cherrybrook, NSW
Contact:

Postby BR14AN » Tue Jun 14, 2011 8:59 pm

Just so everyone knows where I'm at, I'm waiting for an answer from leaseplan, as my car is a novated lease I have to run everything past them first, in this case the removal of stock trim etc.

Sorry, will keep you updated as I know, the long weekend didnt help anything.

User avatar
JustinR
Site Admin
Site Admin
Posts: 1954
Joined: Sat Jan 22, 2011 6:26 pm
Location: Sutherland Shire, Sydney

Postby JustinR » Tue Jun 14, 2011 9:10 pm

BR14AN wrote:Just so everyone knows where I'm at, I'm waiting for an answer from leaseplan, as my car is a novated lease I have to run everything past them first, in this case the removal of stock trim etc.

Sorry, will keep you updated as I know, the long weekend didnt help anything.


Dont you just put them over the original seat covers.. or am i mistaken?

User avatar
BR14AN
Lancer Ralliart
Lancer Ralliart
Posts: 650
Joined: Thu Jan 21, 2010 10:53 pm
Location: Cherrybrook, NSW
Contact:

Postby BR14AN » Tue Jun 14, 2011 9:16 pm

As far as I'm aware you dismantle the interior, undo the original cloth trim, rip it out and replace it?

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Tue Jun 14, 2011 9:32 pm

Wait for Chubb to chime in... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Slash
Lancer Ralliart
Lancer Ralliart
Posts: 651
Joined: Tue May 17, 2011 3:07 pm
Location: Sydney

Postby Slash » Tue Jun 14, 2011 9:40 pm

Looking at the cost, time for install and the fit... I would say its retrim and not a cover...

$1000 for seat covers :shock:
$1000 for complete trim :D

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Tue Jun 14, 2011 9:42 pm

Hello :)

As for the install Brian is correct you are required to pull the factory covers off your seats. This requires you pulling the seats out and un-doing the covers one c-clip at a time (pliers is all you need here).

I will not lie this is a time consuming task it took me a full day for the front seats and another for the rear with around half a day for the door cards. The how to guide provided by shadows is all you need it is very detailed with 600+ photos to help you through plus all the required tools.

Don't let the amount of work scare you, this was my first attempt at any sort of upholstery any mine I feel turned out as good as OEM I only have one very slight crease in the bottom of the back seat.

User avatar
JustinR
Site Admin
Site Admin
Posts: 1954
Joined: Sat Jan 22, 2011 6:26 pm
Location: Sutherland Shire, Sydney

Postby JustinR » Tue Jun 14, 2011 9:43 pm

I originally thought they were the complete trim.. makes sense for the cost.

Thanks Chubb :D

User avatar
INVUR-1
Lancer VR/GT
Lancer VR/GT
Posts: 261
Joined: Thu May 19, 2011 11:13 pm
Location: Australia, Melbourne

Postby INVUR-1 » Wed Jun 15, 2011 10:01 pm

Chubb wrote:Hello :)

As for the install Brian is correct you are required to pull the factory covers off your seats. This requires you pulling the seats out and un-doing the covers one c-clip at a time (pliers is all you need here).

I will not lie this is a time consuming task it took me a full day for the front seats and another for the rear with around half a day for the door cards. The how to guide provided by shadows is all you need it is very detailed with 600+ photos to help you through plus all the required tools.

Don't let the amount of work scare you, this was my first attempt at any sort of upholstery any mine I feel turned out as good as OEM I only have one very slight crease in the bottom of the back seat.


OMG :O that much work ????? I thought this go over the seat

Should i buy this or ask Irving for money back

I know my self i will not able to install this for sure.. :(


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 19 guests