***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

* Mitsubishi OEM Parts for ClubCJ Members *

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Apr 30, 2009 8:48 am

The_Bandit wrote:I would like to get scuff plates, but ones that cover the plastic part of the door exit, not the painted part. The plastic bit is the part that cops grief from my wife on my car.....


Unfortunately, they don't make such a scuff guard except for the EVO. I'd say though that you can adapt the carbon fibre look scuff guard to that purpose. It'll simply stick on.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Thu Apr 30, 2009 8:51 am

Yeah thanks ofey - I thought that too when I saw how long it was. Proper fitting will depend on how wide it is and whether or not it will stick even though the plastic part is slightly curved.

Might be worth a try - the drivers plastic has copped a HAMMERING (I don't know how or why she does it).

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Apr 30, 2009 10:17 am

The_Bandit wrote:Might be worth a try - the drivers plastic has copped a HAMMERING (I don't know how or why she does it).


Since it's really hammered Why not just get a replacement of that kick plate? Surely I can get you a quote for that. Then tell your wife, the next time it gets scratched up, she pays for the next replacement.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
blanka
INACTIVE Member Account
Posts: 822
Joined: Wed Sep 03, 2008 9:47 pm
Location: Cairns, QLD, Australia

Postby blanka » Fri May 01, 2009 11:59 am

hey ofey just wondering the $698 for the RA taillgihts thats for a set right, can we just like one taillight if we wanted or do they only sell them in sets
Uchiha Itachi
Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed May 06, 2009 9:19 am

blanka wrote:hey ofey just wondering the $698 for the RA taillgihts thats for a set right, can we just like one taillight if we wanted or do they only sell them in sets


Sorry that's for a set of 4. You can't just buy one section of it.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed May 06, 2009 9:22 am

I've added a new part to the listings on the first page *Actually alot of new parts*

Everyone should re-scan that list from time to time. I remember The_bandit or someone else asking me about the original scuff plate i.e., the plastic panel that's next to your door. We've located the part and if you want to replace them it's A$40 a piece. So if yours is scratched beyond recognition, you can get it replaced quite cheaply.

We've now got a panel guide so anything you f**k up during your DIY sessions can be replaced too!
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

dumb&

Postby dumb& » Wed May 06, 2009 9:55 am

Ofey when you get time can you inquire about car seat covers? Not in a great rush so let the dust settle from everything else on your plate if need be.

I remember seeing them in the lancer brochure I had - they are designed with the airbags in mind and still allow them to deploy properly as far as I can remember. Though it was a while back so I could just be dreaming haha. They are Mitsi part.

User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Wed May 06, 2009 10:05 am

ofey wrote:Everyone should re-scan that list from time to time. I remember The_bandit or someone else asking me about the original scuff plate i.e., the plastic panel that's next to your door. We've located the part and if you want to replace them it's A$40 a piece. So if yours is scratched beyond recognition, you can get it replaced quite cheaply.

We've now got a panel guide so anything you f**k up during your DIY sessions can be replaced too!


Great stuff ofey - I will keep it in mind. Get a new one and replace the bunged up unit when it gets too unsightly or when it's time for the car to go.

Thanks again!

dumb&

Postby dumb& » Wed May 06, 2009 10:11 am

Does she wear heels often bandit? This could be the issue when she swings her feet out of the car. I know if I'm having a lazy day my feet scuff that panel (it's pretty high TBH, I have to remind myself it's there all the time when getting in and out of the car).

User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Wed May 06, 2009 11:06 am

Hi daveee, no heels man, I think it happens when she puts it in the garage and won't/can't reverse in like I do - she gets too close on the driver's side and then has to squeeze into the seat meaning her shoes drag on the door plastic.

Anyways, $40 isnt the end of the world and it should be a fairly easy fix.

Good result.
ClubCJ's first Sportback

User avatar
blanka
INACTIVE Member Account
Posts: 822
Joined: Wed Sep 03, 2008 9:47 pm
Location: Cairns, QLD, Australia

Postby blanka » Wed May 06, 2009 6:37 pm

ofey wrote:
blanka wrote:hey ofey just wondering the $698 for the RA taillgihts thats for a set right, can we just like one taillight if we wanted or do they only sell them in sets


Sorry that's for a set of 4. You can't just buy one section of it.


ahhh damn was hoping i could just buy the left light cos i can get a right light for free
Uchiha Itachi

Image

User avatar
spunkybob
Lancer MASTER
Lancer MASTER
Posts: 1605
Joined: Thu Dec 04, 2008 11:36 am
Location: Kariong, NSW, Australia

Postby spunkybob » Wed May 06, 2009 7:34 pm

Just read your lisy bro.... have to hide my credit card from myself. :)
Image
>CLICK HERE to view My 08 Lancer in all its Glory!
"Its STILL happy go fun fun time!"

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu May 07, 2009 2:47 pm

New *incoming* sponsors mean new parts mean a new bank balance for those interested:

SPECIAL ORDER
Image
Price: Depending on take up.

Comments:
* Limited edition ONE TIME only.
*NO Air Bags.

Who's up for it?
I need at least 4 seats to be ordered before I can do something.
No I'm not ordering one myself *it's not on my todo list*.
I think the one guy who should go for this is Captain! He'd win ROTM if he put this in!!

Always check the first post of this thread, more parts added EVERYDAY!!
Last edited by ofey on Thu May 07, 2009 2:59 pm, edited 1 time in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Bandit
Lancer Legend
Lancer Legend
Posts: 1170
Joined: Tue Dec 09, 2008 8:56 am
Location: The People's Republic of Campbelltown

Postby Bandit » Thu May 07, 2009 2:50 pm

You could stick one of these in a shopping trolley and win ROTM heheh.

I'd love to, but can't justify/afford it sorry.
ClubCJ's first Sportback

User avatar
m1n1on
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 410
Joined: Sun Dec 28, 2008 10:46 am
Location: Melbourne, VIC, Australia

Postby m1n1on » Thu May 07, 2009 6:07 pm

ofey wrote:New *incoming* sponsors mean new parts mean a new bank balance for those interested:

SPECIAL ORDER
img
Price: Depending on take up.

Comments:
* Limited edition ONE TIME only.
*NO Air Bags.

Who's up for it?
I need at least 4 seats to be ordered before I can do something.
No I'm not ordering one myself *it's not on my todo list*.
I think the one guy who should go for this is Captain! He'd win ROTM if he put this in!!

Always check the first post of this thread, more parts added EVERYDAY!!


Not 100% sure, but wouldn't you need an engineering certificate when changing your seats. Especially if you have side curtain airbags.


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 17 guests