***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Engine not turning over

Servicing, Oil Changes, Fluids & Much More.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
Shaun Patterson
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 381
Joined: Fri Sep 05, 2014 9:59 pm
Location: Rockhampton Australia

Engine not turning over

Postby Shaun Patterson » Tue Oct 07, 2014 11:51 am

hi guys i have my 08 vrx pull apart.. basically the interior is bare excepting wiring harnesses and dash, all the doors and trunk are off ect, today i tried to start her up and not... i can hear the starter motor doing its usual clicking and the fuel pump going but no turn over.. anyone have any suggestion on where i should start?

Cheers :)
User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:
Contact sleeper

Postby sleeper » Tue Oct 07, 2014 5:13 pm

maybe air bags?, theres so many things that could be a problem its hard to know where to start the diagnosis. :(

i guess u have to plug things back in till it starts, trial and error?
210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image
himynameisdaniel
Lancer Evolution
Lancer Evolution
Posts: 824
Joined: Mon Feb 14, 2011 3:58 pm
Location: Adelaide

Postby himynameisdaniel » Tue Oct 07, 2014 5:41 pm

Do you have spark?
Is fuel being delivered into the cylinders?

If you can answer a reliable yes to those questions then check for compression.
User avatar
kburnie
Lancer Newbie
Lancer Newbie
Posts: 34
Joined: Mon Aug 18, 2014 7:26 pm
Location: Perth, Australia

Postby kburnie » Tue Oct 07, 2014 6:22 pm

Mine did the exact same thing it is only a year old though. Problem was that the piston rings were stuck leading to no compression.
I took the road less travelled, and that made all the difference.
User avatar
Shaun Patterson
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 381
Joined: Fri Sep 05, 2014 9:59 pm
Location: Rockhampton Australia

Postby Shaun Patterson » Tue Oct 07, 2014 6:39 pm

yeah im not to sure, it has been turning on fine sitting how it is now, but today it just wouldn't do anything so i have no clue
User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Tue Oct 07, 2014 7:06 pm

battery definitely fully charged?
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."

Image
User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Tue Oct 07, 2014 7:47 pm

All ignition bits still in car? Eg ECU for smart key.
Image

[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]
User avatar
Shaun Patterson
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 381
Joined: Fri Sep 05, 2014 9:59 pm
Location: Rockhampton Australia

Postby Shaun Patterson » Tue Oct 07, 2014 7:53 pm

Yeah all of that is still in the car, tried with a brand new battery also, no luck, there is a continuous beep coming from the engine though...
User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Tue Oct 07, 2014 7:57 pm

Starter motor doesnt usally click unless the battery is dead and you hear the solenoid clicking ?

Can you do a video ?

What have you done before it ?
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85
FULL EVO X TURBO SETUP
APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |
TUNED BY BEEBLE | EXEDY H/D CLUTCH
BC RACING BR COILOVERS
Image
User avatar
Shaun Patterson
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 381
Joined: Fri Sep 05, 2014 9:59 pm
Location: Rockhampton Australia

Postby Shaun Patterson » Tue Oct 07, 2014 7:59 pm

yeah the solenoid is clicking.

The whole car is dismantled but i haven't changed anything since the last time i started it up.

have no way of doing a video atm.


basically when i turn on the ignition i can hear the solenoid go off than the fuel pump starts and then nothing at all.
User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Tue Oct 07, 2014 8:16 pm

hmm, what exactly are you dismantling ?

Any change you got a OBD2 reader ?

When you turn the key, is it cranking and just not turning over ?

Id check for spark.

But definitely a video to help us see your exact issue and then we can help you
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85

FULL EVO X TURBO SETUP

APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |

TUNED BY BEEBLE | EXEDY H/D CLUTCH

BC RACING BR COILOVERS

Image
User avatar
Shaun Patterson
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 381
Joined: Fri Sep 05, 2014 9:59 pm
Location: Rockhampton Australia

Postby Shaun Patterson » Tue Oct 07, 2014 8:43 pm

Fixed her now, was something really simple... the immobilizer, used the emergency key in the fob backwards and it turned on

cheers for your help everyone!
User avatar
Zaphod
Lancer MASTER
Lancer MASTER
Posts: 2357
Joined: Sat Jan 04, 2014 7:28 am
Location: Gold Coast, Qld. Australia

Postby Zaphod » Tue Oct 07, 2014 9:01 pm

sweet! :-)
"The Human species has now evolved to the point where we only have two natural predators; ourselves and peanuts..."



Image
User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Tue Oct 07, 2014 9:37 pm

hahha awks :p
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85

FULL EVO X TURBO SETUP

APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |

TUNED BY BEEBLE | EXEDY H/D CLUTCH

BC RACING BR COILOVERS

Image
Post Reply

Return to “Maintenance”

Who is online

Users browsing this forum: No registered users and 11 guests