***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

OIL TEMP ON RALLIARTS AND EVO X

CJ Lancer Turbo Performance Modifications & Information.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
the sam
Lancer ES/EX
Lancer ES/EX
Posts: 118
Joined: Wed Dec 18, 2013 7:35 pm
Location: Sydney, Australia

Postby the sam » Thu Apr 02, 2015 5:44 am

Couple of guys are running these on race cars with great success.

http://www.ebay.com.au/itm/B-M-SUPERCOOLER-ENGINE-OR-TRANSMISSION-OIL-COOLER-5-3-4-X-11-X-1-1-2-BM70273-/140790146196?pt=LH_DefaultDomain_15&hash=item20c7bf2494

You will have to figure out somewhere to fit the cooler though as we have the window washer bottle where the evos have the oil cooler stock, as well as getting some lines and fittings to connect it to the oil filter flange on the block:

Image

May also need to add a thermostat where the black circle is as the oil will be flowing continuously through the cooler.
230kw/430nm @ 24psi on E85
12.191 @ 108.81mph - Fastest stock turbo ralliart in Australia
www.facebook.com/BoostinJuiceTuningSydney
www.clubcj.net/viewtopic.php?p=369141#369141
User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Fri Apr 03, 2015 10:23 am

Evo X cooler should be fine. Straight fit with the bracket and lines. And yeah it sucks.... washer bottle is in the way LOL
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85
FULL EVO X TURBO SETUP
APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |
TUNED BY BEEBLE | EXEDY H/D CLUTCH
BC RACING BR COILOVERS
Image
User avatar
PistenBoy
Lancer Learner
Lancer Learner
Posts: 10
Joined: Wed May 08, 2013 2:58 pm
Location: Australia

Postby PistenBoy » Fri Apr 03, 2015 5:17 pm

I was looking at that before... We can relocate or make the washer bottles smaller to be able to mount the cooler in the X spot.
User avatar
PistenBoy
Lancer Learner
Lancer Learner
Posts: 10
Joined: Wed May 08, 2013 2:58 pm
Location: Australia

Postby PistenBoy » Fri Apr 03, 2015 5:17 pm

I was looking at that before... We can relocate or make the washer bottles smaller to be able to mount the cooler in the X spot.
User avatar
LiX
Lancer ES/EX
Lancer ES/EX
Posts: 126
Joined: Mon Nov 09, 2009 7:38 am
Location: Sofia, Bulgaria

Postby LiX » Sat Apr 04, 2015 1:23 am

Thermostat is a must!
Regarding the washer bottle, you can always relocate it in the trunk like on the X.
Image
User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Postby lancerdarryl » Sat Apr 04, 2015 8:01 am

LiX wrote:Thermostat is a must! Regarding the washer bottle, you can always relocate it in the trunk like on the X.

What about using the X headlight washer bottle as your windscreen washer bottle?
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"
User avatar
LiX
Lancer ES/EX
Lancer ES/EX
Posts: 126
Joined: Mon Nov 09, 2009 7:38 am
Location: Sofia, Bulgaria

Postby LiX » Sun Apr 05, 2015 7:32 am

lancerdarryl wrote:What about using the X headlight washer bottle as your windscreen washer bottle?

It can be used, however it's too small in volume. I'm refilling it quite regularly.
Image
User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Mon Apr 06, 2015 11:55 am

Yeah thats what i got, the evo x headlight washer bottle. Sits nicely behind the evo x cooler.

Just the pump and wiring is different

Can anyone confirm if i snipped the wires off the washer pump plug to the evox headlight washer pump plug ?

Thanks
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85

FULL EVO X TURBO SETUP

APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |

TUNED BY BEEBLE | EXEDY H/D CLUTCH

BC RACING BR COILOVERS

Image
User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Postby lancerdarryl » Mon Apr 06, 2015 2:54 pm

Should work OK Denis,I think the headlight washer pump is a higher volume pump so you should have the best windscreen washers in town!
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR

"Don't back off until you hit something"
User avatar
chris
Lancer ES/EX
Lancer ES/EX
Posts: 194
Joined: Sun May 03, 2009 1:14 pm

Postby chris » Mon Apr 06, 2015 9:47 pm

Modern full-synthetic oils are ok to 150c or more
User avatar
chris
Lancer ES/EX
Lancer ES/EX
Posts: 194
Joined: Sun May 03, 2009 1:14 pm

Postby chris » Mon Apr 06, 2015 10:33 pm

GF-4 certified oil SM/SN/CJ4 oils have to pass the sequence 111G test with the oil at 150c for 100 hours at 3600rpm so I would`nt panic if you are using a decent oil .
User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Sun Apr 19, 2015 2:44 pm

And all installed :)

Its working now

The actual oil temp sensor was out by 20 degree C.
Used a thermal infrared gun

Oil Thermostat is next but should be ok for now

Thanks everyone!
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85

FULL EVO X TURBO SETUP

APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |

TUNED BY BEEBLE | EXEDY H/D CLUTCH

BC RACING BR COILOVERS

Image
Post Reply

Return to “2008+ Turbo Performance”

Who is online

Users browsing this forum: No registered users and 10 guests