***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* LANCER New Style L.E.D. Tail Lights

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Dec 28, 2011 9:43 pm

EDIT
So you all know what these are.

We have had an offer to these.
The updated ones with the load resistor built in. So no need for our A$0.20 external resistor solution

9 sets in total, all SMOKED. (Pls don't ask if there are others).
A$330 delivered.

If you're keen PM me or if you cannot PM, post up.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Wed Dec 28, 2011 9:48 pm

"New Style" LED Tailights ... which ones .... ??

Can you Post-Up a Pic Please Irving.


Sam.
Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Dec 28, 2011 9:50 pm

No new style. It's the same ones on the car. Look at the first post.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
JaZira5
Lancer VR/GT
Lancer VR/GT
Posts: 213
Joined: Sat Mar 12, 2011 3:03 am
Location: Hawthorne, Queensland, Australia

Postby JaZira5 » Wed Dec 28, 2011 10:02 pm

Looks good, except as much as I really would like to get a set. I'm going to hold off for those OEM style looking LED tail lights.

Maybe you should look into getting them ofey? Im sure there is a bunch of people who are interested in getting that style instead.

Many thanks for the work you do. ^_^

User avatar
Meaty
Lancer Evolution
Lancer Evolution
Posts: 978
Joined: Wed Nov 10, 2010 4:30 pm
Location: Melbourne Australia

Postby Meaty » Wed Dec 28, 2011 10:16 pm

$330 bargain !! i paid $370.

why mod your car if you want a mod that looks like OEM ?.... anyhoo each to there own.
Image

kakar0t
Lancer ES/EX
Lancer ES/EX
Posts: 113
Joined: Fri Jan 28, 2011 10:12 pm
Location: Melbourne, AUstralia

Postby kakar0t » Wed Dec 28, 2011 10:44 pm

Ofey, are these the same taillights installed on your lancer, as per the pics in your garage page?

User avatar
Josh_Emerton
Lancer MASTER
Lancer MASTER
Posts: 1920
Joined: Fri Oct 17, 2008 10:49 pm
Location: Cairns, QLD, Australia

Postby Josh_Emerton » Thu Dec 29, 2011 1:41 am

Yeah they are the same ones on Ofey's car.

In fact, the Grey one in the first post IS Ofey's car..... lmfao.

Ofey, you just gonna keep this going til you sell all 9 sets? If so - how much delivery to me? Roughly. I might be able to put the money aside in a couple of weeks...


edit: just saw the word "delivered" >.<. I'm gonna put aside $100/wk Ofey but don't hold one for me - if you sell all 9 by then I will understand, no big deal. On the other hand, if you still have one in 4 weeks time, I'll take it :D
Image

User avatar
JaZira5
Lancer VR/GT
Lancer VR/GT
Posts: 213
Joined: Sat Mar 12, 2011 3:03 am
Location: Hawthorne, Queensland, Australia

Postby JaZira5 » Thu Dec 29, 2011 3:09 am

Meaty wrote:$330 bargain !! i paid $370. why mod your car if you want a mod that looks like OEM ?.... anyhoo each to there own.


Yes each to their own. I just find the OEM style more appealling. It looks like any other, but has a unquie twist to it, in that it's LED lights. I prefer discretion instead of flamboyant mods, that yells out "oi, you over there, look at me". Hence why I've not changed much of the exterior of my car, but slowly changing its insides.

But that's just me. ^_^

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Dec 29, 2011 7:35 am

Just so everyone is aware about all the aftermarket LED Tail Lamps, I thought I should slap this together.

There are altogether 4 clearly diffferent aftermarket LED Tail Lamps for Sedans.
To the best of our knowledge, None have been made for Sportbacks.

Now the first to hit the market are those most cars here have:

1. Copy of Lancer iO in Taiwan
So based on a Mitsubishi design for the Taiwan Domestic Market which looked like this:
Image

This was produced:
Image

Made in Taiwan, these have gone through the following price points (delivered pricing):
A$777 @ launch, A$440 (1st Group Buy), A$370 (2nd Sale), A$330 (currently)

- The initial batches had a problem with a Check Engine Light due to them not having a load resistor built into the brake light circuit.

- We were the first forum to solve this problem for about 60cents by putting in a ceramic 130 Ohm 5W resistor
The current batch has been corrected and this is no longer the case.

-These are legally E-marked for the Chrome and Smoked designed. There have been reports that the E-mark for the Blacked out version is not legal. The manufacturer bowed to customer demand for it. E-marks are inherent in the mould for the lens, how the manufacturer decides to tint the lens, that's another matter altogether, so caveat emptor.

2. Copy Audi Tail Lamp
So based on the Audi Tail Lamp concept:
Image,

This got made up by a company in China:
Image

Price points delivered for these have been between A$500 -> A$335 (currently)
- No known problems with the set.

3. Copy of OEM Tail Lamp (but with LEDs)
So based on the original Lancer Tail Lamp:
Image

Another Taiwanese company (Depo) formulated these:
Image

Price points A$400 -> A$355 (delivered)

- No known problems

4. Copy of (Copy of Lancer iO in Taiwan)
So The Chinese can copy anything right? They've copied a copy.

ImageImage

Sorry no pictures of them on cars though a VIC member R4sty has them on his ride.

Price points (delivered) : A$280 -> A$320
- No known Problems
Last edited by ofey on Wed Mar 28, 2012 9:09 pm, edited 2 times in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

kakar0t
Lancer ES/EX
Lancer ES/EX
Posts: 113
Joined: Fri Jan 28, 2011 10:12 pm
Location: Melbourne, AUstralia

Postby kakar0t » Thu Dec 29, 2011 5:53 pm

Thanks heaps ofey, your post makes it much easier for people shopping for aftermarket taillights like myself. A quick question, is the installation simple as plug+play, i.e. no soldering involved?

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Dec 29, 2011 8:26 pm

Yes. All install direct plug and play.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

leroysCJ
Lancer Newbie
Lancer Newbie
Posts: 36
Joined: Thu Nov 04, 2010 12:18 am
Location: Adelaide

Postby leroysCJ » Thu Dec 29, 2011 10:51 pm

im keen for a set of the smoked ones have u stilll got any left??

User avatar
avolance
Lancer Newbie
Lancer Newbie
Posts: 24
Joined: Tue Dec 27, 2011 5:23 pm
Location: Gippsland,VIC

Postby avolance » Fri Dec 30, 2011 7:15 am

Hi Ofey, yes you can put me down for a set !
(whew took a while to get thru the entire thread just to see what's what)

Can you PM me the details.
I should be able to come up to Melbourne and pick them up.

Thanks heaps.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Dec 30, 2011 7:42 am

@leroysCJ
&
@avolance

I've PM-ed both you details.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
BrownDog
Lancer Ralliart
Lancer Ralliart
Posts: 716
Joined: Wed Feb 10, 2010 7:31 pm
Location: Perth, WA

Postby BrownDog » Fri Dec 30, 2011 9:47 am

I know they are plug and play, but how hard are they to install????
MODS DONE
Sound System
Exhaust
Tint
Rear Sway Bar

MODS TO DO
Wheels
Lips/ Bodykit
Install in-car LEDs


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 24 guests