EDIT
So you all know what these are.
We have had an offer to these.
The updated ones with the load resistor built in. So no need for our A$0.20 external resistor solution
9 sets in total, all SMOKED. (Pls don't ask if there are others).
A$330 delivered.
If you're keen PM me or if you cannot PM, post up.
***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
*CLOSED* LANCER New Style L.E.D. Tail Lights
Moderator: Senior Moderators
- Josh_Emerton
- Lancer MASTER
- Posts: 1920
- Joined: Fri Oct 17, 2008 10:49 pm
- Location: Cairns, QLD, Australia
Yeah they are the same ones on Ofey's car.
In fact, the Grey one in the first post IS Ofey's car..... lmfao.
Ofey, you just gonna keep this going til you sell all 9 sets? If so - how much delivery to me? Roughly. I might be able to put the money aside in a couple of weeks...
edit: just saw the word "delivered" >.<. I'm gonna put aside $100/wk Ofey but don't hold one for me - if you sell all 9 by then I will understand, no big deal. On the other hand, if you still have one in 4 weeks time, I'll take it
In fact, the Grey one in the first post IS Ofey's car..... lmfao.
Ofey, you just gonna keep this going til you sell all 9 sets? If so - how much delivery to me? Roughly. I might be able to put the money aside in a couple of weeks...
edit: just saw the word "delivered" >.<. I'm gonna put aside $100/wk Ofey but don't hold one for me - if you sell all 9 by then I will understand, no big deal. On the other hand, if you still have one in 4 weeks time, I'll take it
- JaZira5
- Lancer VR/GT
- Posts: 213
- Joined: Sat Mar 12, 2011 3:03 am
- Location: Hawthorne, Queensland, Australia
Meaty wrote:$330 bargain !! i paid $370. why mod your car if you want a mod that looks like OEM ?.... anyhoo each to there own.
Yes each to their own. I just find the OEM style more appealling. It looks like any other, but has a unquie twist to it, in that it's LED lights. I prefer discretion instead of flamboyant mods, that yells out "oi, you over there, look at me". Hence why I've not changed much of the exterior of my car, but slowly changing its insides.
But that's just me. ^_^
- ofey
- Alumni
- Posts: 8582
- Joined: Mon Oct 27, 2008 8:56 pm
- Location: Melbourne, VIC, Australia
- Contact:
Just so everyone is aware about all the aftermarket LED Tail Lamps, I thought I should slap this together.
There are altogether 4 clearly diffferent aftermarket LED Tail Lamps for Sedans.
To the best of our knowledge, None have been made for Sportbacks.
Now the first to hit the market are those most cars here have:
1. Copy of Lancer iO in Taiwan
So based on a Mitsubishi design for the Taiwan Domestic Market which looked like this:
This was produced:
Made in Taiwan, these have gone through the following price points (delivered pricing):
A$777 @ launch, A$440 (1st Group Buy), A$370 (2nd Sale), A$330 (currently)
- The initial batches had a problem with a Check Engine Light due to them not having a load resistor built into the brake light circuit.
- We were the first forum to solve this problem for about 60cents by putting in a ceramic 130 Ohm 5W resistor
The current batch has been corrected and this is no longer the case.
-These are legally E-marked for the Chrome and Smoked designed. There have been reports that the E-mark for the Blacked out version is not legal. The manufacturer bowed to customer demand for it. E-marks are inherent in the mould for the lens, how the manufacturer decides to tint the lens, that's another matter altogether, so caveat emptor.
2. Copy Audi Tail Lamp
So based on the Audi Tail Lamp concept:
,
This got made up by a company in China:
Price points delivered for these have been between A$500 -> A$335 (currently)
- No known problems with the set.
3. Copy of OEM Tail Lamp (but with LEDs)
So based on the original Lancer Tail Lamp:
Another Taiwanese company (Depo) formulated these:
Price points A$400 -> A$355 (delivered)
- No known problems
4. Copy of (Copy of Lancer iO in Taiwan)
So The Chinese can copy anything right? They've copied a copy.
Sorry no pictures of them on cars though a VIC member R4sty has them on his ride.
Price points (delivered) : A$280 -> A$320
- No known Problems
There are altogether 4 clearly diffferent aftermarket LED Tail Lamps for Sedans.
To the best of our knowledge, None have been made for Sportbacks.
Now the first to hit the market are those most cars here have:
1. Copy of Lancer iO in Taiwan
So based on a Mitsubishi design for the Taiwan Domestic Market which looked like this:
This was produced:
Made in Taiwan, these have gone through the following price points (delivered pricing):
A$777 @ launch, A$440 (1st Group Buy), A$370 (2nd Sale), A$330 (currently)
- The initial batches had a problem with a Check Engine Light due to them not having a load resistor built into the brake light circuit.
- We were the first forum to solve this problem for about 60cents by putting in a ceramic 130 Ohm 5W resistor
The current batch has been corrected and this is no longer the case.
-These are legally E-marked for the Chrome and Smoked designed. There have been reports that the E-mark for the Blacked out version is not legal. The manufacturer bowed to customer demand for it. E-marks are inherent in the mould for the lens, how the manufacturer decides to tint the lens, that's another matter altogether, so caveat emptor.
2. Copy Audi Tail Lamp
So based on the Audi Tail Lamp concept:
,
This got made up by a company in China:
Price points delivered for these have been between A$500 -> A$335 (currently)
- No known problems with the set.
3. Copy of OEM Tail Lamp (but with LEDs)
So based on the original Lancer Tail Lamp:
Another Taiwanese company (Depo) formulated these:
Price points A$400 -> A$355 (delivered)
- No known problems
4. Copy of (Copy of Lancer iO in Taiwan)
So The Chinese can copy anything right? They've copied a copy.
Sorry no pictures of them on cars though a VIC member R4sty has them on his ride.
Price points (delivered) : A$280 -> A$320
- No known Problems
Last edited by ofey on Wed Mar 28, 2012 9:09 pm, edited 2 times in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
Return to “Group Buys Service”
Who is online
Users browsing this forum: No registered users and 4 guests