***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* Group Buys -> Relaunched

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
BrownSound
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 446
Joined: Thu Feb 10, 2011 9:57 pm
Location: Sydney, Australia

Postby BrownSound » Sun May 01, 2011 3:26 pm

I'd be interested in the Dash dandy and if you were up for a RA intake group buy? (it looks like there are quite a few people that buy them off you anyway).

But either way as one of the new members I am really keep to make the most of group buys. Thanks heaps Ofey :)

Pascher
Lancer Newbie
Lancer Newbie
Posts: 35
Joined: Thu Apr 21, 2011 4:08 pm
Location: Perth, Australia

Postby Pascher » Sun May 01, 2011 4:47 pm

Hey Ofey,

Definitely keen on the sunglasses holder, and interested in the dash dandy for a GB.

What is the verdict on the dash dandy, compared to let's say ArmorAll products?

Cheers.

User avatar
Kyrus
Lancer Legend
Lancer Legend
Posts: 1019
Joined: Wed Apr 06, 2011 8:36 pm
Location: Sydney, Australia

Postby Kyrus » Sun May 01, 2011 5:44 pm

BrownSound wrote:I'd be interested in the Dash dandy and if you were up for a RA intake group buy? (it looks like there are quite a few people that buy them off you anyway).

But either way as one of the new members I am really keep to make the most of group buys. Thanks heaps Ofey :)


good call, the ra snorkle would be nice. definately interested in that.

User avatar
driftnut((
Lancer Evolution
Lancer Evolution
Posts: 950
Joined: Sun Oct 11, 2009 12:05 pm
Location: central coast Australia

Postby driftnut(( » Sun May 01, 2011 6:00 pm

hey ofey DBA slotted disc's and pads i was quoted $880 for the standard lancer fromat (AKA N/A) that's installed so if you need part numbers i can get them also if you do an EOI for them i'll get gruop prices for you mate..
Image

driftnut((.. ClubCJ's first RX TURBO, Merlinised, K&N pod 18" KING wheels, BC coil overs, Alpine/Pioneer system, Short shifter, Cat back system, Evo x turbo system, ralliart injectors & pump

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sun May 01, 2011 6:38 pm

Here's where the group buy gets very complicated.

The sizes and specs of brakes and rotors are all different, so:

ES/Activ/SX/Platinum and VR are all one size
Front Rotors
Rear Rotors
Front Brake Pads
Rear Brake Pads


VRX/Olympic Ed/Aspire are all one size
Front Rotors
Rear Rotors
Front Brake Pads
Rear Brake Pads

RA another size
Front Rotors
Rear Rotors
Front Brake Pads
Rear Brake Pads

So we need 12 different part numbers and sizing.

Also DBA offers different grades and levels of brakes and pads to add to this confusion. I'll try and sort it out but any help would help.

Install is usually A$150 in Melbourne for a set of front and rear rotors and pads.
I paid A$330 for RDA slotted and dimpled front rotors and Greenstuff front and back pads.

So I paid about A$480+A$150=A$630 to get my brakes done awhile ago. I see no point in doing the rear rotors since we're not AWD no RWD.
Rather spend the money on changing brake lines.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
driftnut((
Lancer Evolution
Lancer Evolution
Posts: 950
Joined: Sun Oct 11, 2009 12:05 pm
Location: central coast Australia

Postby driftnut(( » Sun May 01, 2011 8:25 pm

yeah but doing it all round does look better plus its only about 180 more, and i'm pretty sure it included braided hoses i'm getting them done within the month so i will post pics and part numbers up for you as well
Image



driftnut((.. ClubCJ's first RX TURBO, Merlinised, K&N pod 18" KING wheels, BC coil overs, Alpine/Pioneer system, Short shifter, Cat back system, Evo x turbo system, ralliart injectors & pump

User avatar
ecl27
Lancer Newbie
Lancer Newbie
Posts: 83
Joined: Wed Aug 11, 2010 2:38 am
Location: Perth WA

Postby ecl27 » Sun May 01, 2011 8:29 pm

Any chance of getting SST gearbox oil and that expensive expensive filter for the SST ppl. Will be in for the dashboard spray and sparkies. Cheers

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Sun May 01, 2011 8:42 pm

According to the DBA Website, there is no discs at all available for the VRX.

The RA only has front discs available, and the ES looks like only non slotted discs listed for the rear. Their catalogue may be incorrect though.

IMHO the QFM A1RM pads that GSL rallysport sell leave the EBC greenstuff for dead. The Greens faded and overheated. Never any fade with the QFMs. Might be worth keeping in mind.

User avatar
driftnut((
Lancer Evolution
Lancer Evolution
Posts: 950
Joined: Sun Oct 11, 2009 12:05 pm
Location: central coast Australia

Postby driftnut(( » Sun May 01, 2011 8:52 pm

yer i know the website is a fail the bloke at my local rang them and sourced them for me
Image



driftnut((.. ClubCJ's first RX TURBO, Merlinised, K&N pod 18" KING wheels, BC coil overs, Alpine/Pioneer system, Short shifter, Cat back system, Evo x turbo system, ralliart injectors & pump

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Sun May 01, 2011 10:28 pm

You only have es brakes Ben so the listing would be correct, the confusion lies with the larger brake packages on vrx up.

User avatar
driftnut((
Lancer Evolution
Lancer Evolution
Posts: 950
Joined: Sun Oct 11, 2009 12:05 pm
Location: central coast Australia

Postby driftnut(( » Sun May 01, 2011 10:51 pm

yeah but doing it all round does look better plus its only about 180 more, and i'm pretty sure it included braided hoses i'm getting them done within the month so i will post pics and part numbers up for you as well
Image



driftnut((.. ClubCJ's first RX TURBO, Merlinised, K&N pod 18" KING wheels, BC coil overs, Alpine/Pioneer system, Short shifter, Cat back system, Evo x turbo system, ralliart injectors & pump

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Sun May 01, 2011 10:53 pm

sometime down the track i may have a look at them

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sun May 01, 2011 11:18 pm

If you gb Dash Dandy I will grab 5 of them.

User avatar
milobob
Lancer Legend
Lancer Legend
Posts: 1130
Joined: Mon Aug 31, 2009 6:16 pm
Location: Melbourne

Postby milobob » Mon May 02, 2011 1:05 am

I vote for number 6: Sunglass holder!
2010 RenaultSport Megane RS250 Cup Trophee (Xenons+Leather+Front Parkers)

User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

Postby PYLee » Mon May 02, 2011 1:37 am

dash dandy - does it work on vinyl , esp those on the b-pillars ? i seem to have permanent finger prints on them
Lancer Evolution 10MR


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 3 guests